Water Cooled Xenon Lamp Aging Test Chamber Condensation Effect

Xenon lamp aging test chamber is an experimental equipment to simulate the natural environment for aging test, which can be provided by qisnun Precision Electromechanical Technology Co., Ltd. In addition, the R&D technical engineer of Standard Group made a brief introduction about its condensation effect, hoping to be helpful to customers.

1. The test chamber uses a condenser to simulate the effect of rain and dew on the surface of the \'sample. During the test, the water injection tank at the bottom of the test chamber is heated to generate steam, which maintains the relative humidity in the test chamber and has a certain temperature rise . The sample forms the inner wall of the test chamber, and the cooling effect of ambient air makes the test surface The temperature difference below the temperaturevapor allows liquid water to continuously condense on the test surface throughout the condensation cycle.

2. The condensed water obtained is very stable, pure and free of dissolved solids, which promotes the reproduction of test results and eliminates the problem of water spots. At the same time, like natural dew, the newly condensed water is saturated with dissolved oxygen and is therefore necessarily very corrosive. Another advantage of this patented condensation system is that the test does not require the use of distilled or deionized water, it can use ordinary tap water, during the evaporation process the water is automatically distilled then condensed on the sample.

3. Since the exposure time to humidity during outdoor exposure can be up to 12 hours a day, the soaking cycle usually lasts several hours. Please note that the processes of ultraviolet exposure andcondensation in the equipment must be separated. Proceed as in natural climatic conditions.

Shanghai Fanbiao Textile Testing Technology Co., Ltd., as an enterprise integrating R&D, manufacturing, sales, training and service, is committed to continuously providing more testing instruments on the market, providing long-term textile, non-standard customization is also acceptable for testing instruments for leather, combustion, automotive interior materials, environmental weather aging, masks, etc. Before purchase, we can carry out targeted tests according to customer requirements to ensure that the instruments purchased are suitable.

Prev: Solution to abnormal compressor of xenon lamp aging tester