Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Solution to abnormal compressor of xenon lamp aging tester

Solution to abnormal compressor of xenon lamp aging tester

Author:QINSUN Released in:2023-08 Click:99

As the technology of the xenon lamp aging test machine becomes more and more perfect, the efficiency of the refrigeration system has been improved to a higher level, so for the compressor, which is the core component of the refrigeration system, the probability of failure and the frequency of failure are greatly reduced. But once the compressor in the test box breaks down, it will be a fatal failure for the equipment. The research and development engineer of qisnun Precision Electromechanical Technology Co., Ltd. said that sufficient attention should be paid to the failure of the compressor in the test box, and the following inspection steps and solutions should be strictly followed:

1. Inspection steps:

1. Check the location of the equipment, if there is a position more than 30cm from the wall;

2. If there is an enclosed space around.

2. Solution:

1. If not, please keep the surrounding area more than 30cm Due to poor heat dissipation heat, the operating current of the compressor will increase, which will cause the overcurrent protection device to operate;

2. If the environment is a closed space, the temperature of the environment will increase and the compressor running current will also increase.So high that the over-current (heat build-up) protection will work, so please keep the surrounding ventilation;

3. After the above problems are solved, please configure overcurrent protection (heat storage chamber) Press the back button and press down, if you hear a click, it means the compressor is overloaded too much, but it will also reset at this time. there.At this point, please set the valsetting value at 1.25 times the rated current of the compressor.

If the compressor of the xenon lamp aging test machine does not cause irreversible and serious failures that need to be replaced and repaired, I believe that as long as we follow the above inspectionssteps and solutions , common abnormal compressor problems will be solved.

Shanghai Fanbiao Textile Testing Technology Co., Ltd., as an enterprise integrating R&D, manufacturing, sales, training and service, is committed to continuously providing more testing instruments. market test, providing long-term textiles, Non-standard customization is also acceptable for testing instruments for leather, combustion, automotive interior materials, environmental weather aging, masks, etc. Before purchase, we can conduct targeted tests according to customer requirements to ensure that the instrumentsitems purchased are suitable.