Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Rubber abrasion tester

Rubber abrasion tester

Author:QINSUN Released in:2023-03 Click:121

This machine is suitable for elastic materials, rubber, tires, conveyor belts, shoe soles, soft synthetic leather. . . The wear measurement of other materials has the characteristics of high performance, good reproducibility and easy operation. The main principle is that under a certain load, at a certain level of mesh, the columnar sample is ground and ground for a certain impact on the surface of the mesh, and the mass abrasion of the sample is measured, and then calculated from the density of the sample Volume wear, in order to make the test comparable, the standard rubber should ultimately be used, and the test result is expressed as the relative volume wear based on the calibrated mesh or fully expressed as the wear against a certain standard rubber wear-resistant base.

Based on the standard:

DIN 53516, JIS K6369, GB/ T 20991 Section 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903, JIS K6264, GB/T9867, ISO4649, etc.


Roller Abraser, also known as DIN Abraser, is used to measure the abrasion resistance of rubber tires, rubber shoes, tapes, etc. to ensure the quality of rubber products. During the test, the rubber material rubs against the mesh on the roller under a certain load and the wear of the sample is measured within the specified stroke. Meet the requirements of GB9867, ISO4649 and DIN53516. The machine has the advantages of small sample size, time saving, non-repetitive friction path and low noise.


Test piece: φ16mm, 6~15mm (D)

Load armature: 2.5N

Weight load: 2.5N, 5N

Side displacement clamp: 4.2mm/roll per circle

Sanding cloth: 60 #

Diameter roller: 150 mm

Length roller: 460 mm

Speedroll: 40 rpm

Planned stroke: 40m/20m

Sanding speed: 0.32 m/sec

Pitch angle: 3° Angle between the support axis of the test piece and the vertical surface of the roll

Volume: 70×30× 30cm

Weight: 61kg

Power supply: 1∮, AC220V, 3A

Standard configuration:

2 pcs P60# standard sandpaper, 1 standard die, 5 standard test pieces, 1 aluminum block, 1 brush, 1 small benchtop drill.

Product details:

Put the samples together in a specific carrier and placed on a drum wrapped in standard sandpaper. The operator records the weight of the sample before and after the test to detect the weight loss and uses this value to calculate the abrasion resistance via the standard formula.

Note: For general use, you must purchase a specific gravity balance for use

Quality Guarantee:

1. If the instrument purchased by the user has quality problems during normal use, if it is within the warranty period (one year), please refer to the product warranty card or contact the manufacturer or service station directly for the methods indicated in the manual and other relevant materials. If your request is not answered, please contact our customer service in time, and we will help you protect your rights.

2. In any of the following situations, the user will not be able to enjoy the one-year warranty obligation

The instrument has been subjected to abnormal use, storage under abnormal conditions, exposure to humid environment exposure to high or low temperatures, unauthorized repairs, misuse, neglect, abuse, accidents, alterations, improper installation, acts of God, spilled food or liquids, normal wear and tear of the instrumentent, etc. Instruments outside the warranty period (one year).

Problem with the delivery of the instrument:

The delivery of this instrument can be arranged by express mail or logistics to the user delivered. also possible for the manufacturer to send the instrument directly to the user\'s location, or have it delivered by a road transport company. Whatever method is used to transport the instrument, the user has the right to request that the instrument is fully packaged and that all accessories are complete upon receipt.

For door-to-door users: check the instrument and accept it on site according to the order. If the instrument is missing, damaged, incomplete or incorrectly delivered, point it out and reject it on site or call when the courier arrives We have customer service, we will redeliver free of charge, otherwise you must call our customer service to find outclarify after signing for the receipt, and you can return the instrument after receiving Authorization Free return.