Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Martindale abrasion tester

Martindale abrasion tester

Author:QINSUN Released in:2023-03 Click:117

Scope of application:
This instrument is used for pilling test and fabric abrasion resistance test on fabric, skin, simulated skin, carpet, non-woven fabric, etc. Sample holders with pneumatic or manual systems for 4 or 6 test heads.

Product description:
This instrument is suitable for testing the pilling degree of substances such as GB/T4802.2, ASTM D4970, ISO12945-2, etc The principle: under a given pressure, the round sample is rubbed against the fabric of the same material with the trajectory of the Lissajous figure, and after reaching the specified number of revolutions, the pilling level of the sample is evaluated. It is also suitable for the abrasion resistance test of GB/T13775, ASTM D4966, ISO12947 and other fabrics. The principle: Under a certain pressure, the round fabric sample rubs against the standard abrasive according to the movement trajectory of the Lissajous curve, resulting in damage to the monster.The abrasion resistance of the fabric is expressed by the number of times the sample is damaged performance.

Standard:
ASTM D4970 ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2 ASTM D4966 ISO 12947 FZ/T 20020 BS 3424- 24 /5690 ISO 12947.1/12947.2 M&S P17/P19/P19C NEXT 18/18a/18b ISO 5470-2 IWTO-40 JIS L1096 8.17.5 Method E Woolmark TM 112/196 BS EN 388/530/13770 4

Technical parameters:
1. Number of stations: 6;
2. Count range: 0~999999 times
3.zui Large stroke : horizontal 60.5 ± 0.5mm vertical 24 ± 0.5mm
4. Mass of pressurized material:
a. Container: 200±1g
b. Garment sample weight: 395±2g
C. Furniture decoration sample weight: 594±2g D. Stainless steel butterfly valve: 260±1g 5. Effective friction diameter of the grinding block: A Type 200g (1.96N) friction head ( 9KPa) ¢ 28.8 -0.084mm
Type B 155g (1.52N) friction head (12KPa) ¢ 90 -0.10mm
6.Relative moving speed between holder and grinding table: 20-70r/min (adjustable)
7 Weight of sample loading hammer: 2385±10g

Instrument configuration and consumables:
1. 6 sets of sample clamps;
2.9 9 pieces of Kpa ​​and 12KPa weights;
3. One set of Φ38mm and Φ140mm samplers;
4. One piece back plate for Φ38mm and Φ140mm samplers ;
5. Pilling test A set of sets;
6. A set of SM50 standard samples;
7. A set of EMPA standard pilling samples and a piece of SM-25 standard emery cloth 1.6m×5m ;
8 . One set of standard foam 1.5m×0.5m (4pcs/set);
9. One piece of standard felt sheet;
10. 20pcs Φ90mm felt disc;
11. Φ38 mm , 50 pieces Φ140 mm sampling sheets;
12. Other accessories recommended by the manufacturer.

Prev:

Next: