Testing machine for testing rubber rollers

This machine is suitable for elastic materials, rubber, tires, conveyor belts, shoe soles, soft synthetic leather. ． ． The wear measurement of other materials has the characteristics of high performance, good reproducibility and easy operation. The main principle is that under a certain load, at a certain level of mesh, the columnar sample is ground and ground for a certain impact on the surface of the mesh, and the mass abrasion of the sample is measured, and then calculated from the density of the sample Volume wear, in order to make the test comparable, the standard rubber should ultimately be used, and the test result is expressed as the relative volume wear based on the calibrated mesh or fully expressed as the wear against a certain standard rubber wear-resistant base.

Based on the standard:

DIN 53516, JIS K6369, GB/ T 20991 Section 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903, JIS K6264, GB/T9867, ISO4649, etc.

Features:

Roller Abraser, also known as DIN Abraser, is used to measure the abrasion resistance of rubber tires, rubber shoes, tapes, etc. to ensure the quality of rubber products. During the test, the rubber material rubs against the mesh on the roller under a certain load and the wear of the sample is measured within the specified stroke. Meet the requirements of GB9867, ISO4649 and DIN53516. The machine has the advantages of small sample size, time saving, non-repetitive friction path and low noise.

Specifications:

Test piece: φ16mm, 6~15mm (D)

Load armature: 2.5N

Weight load: 2.5N, 5N

Side displacement clamp: 4.2mm/roll per circle

Sanding cloth: 60 #

Diameter roller: 150 mm

Length roller: 460 mm

Speedroll: 40 rpm

Planned stroke: 40m/20m

Sanding speed: 0.32 m/sec

Pitch angle: 3° Angle between the support axis of the test piece and the vertical surface of the roll

Volume: 70×30× 30cm

Weight: 61kg

Power supply: 1∮, AC220V, 3A

Standard configuration:

2 pcs P60# standard sandpaper, 1 standard die, 5 standard test pieces, 1 aluminum block, 1 brush, 1 small benchtop drill.

Product details:

Put the samples together in a specific carrier and placed on a drum wrapped in standard sandpaper. The operator records the weight of the sample before and after the test to detect the weight loss and uses this value to calculate the abrasion resistance via the standard formula.

Note: For general use, a specific gravity balance needs to be purchased separately

The reason for choosing us:

1 , We have professional pre-sales engineers who can develop personalized solutions according to your needs before purchasing. Our company can adjust production for some products.
2. Our company\'s products are cost-effective, complete in variety, sufficient stock of related accessories and consumables, and prompt in delivery.
3. We have established a complete after-sales service mechanism in all regions of the country, from installation, maintenance, training to all links, including the second training after your users leave, to ensure that you do not buy our products Worry about after sales.
4. High user recognition. Our company has 12 years of industry experience, closely follows industry standards, and our products are widely recognized by users in more than 20 countries in Southeast Asia. We not only provide you with high quality cost-effective products, but also provide you with oone-stop solutions Professional engineers The added value for you is far from guaranteed.

Friendly reminder:
1. You just need to call: or email to info@standard-groups.com, we will provide you with solutions and solutions in the first time offer.
2. We have a complete range of products and can provide you with supporting spare parts and equipment. If you need premium products, you need to let us know 3 weeks in advance, and we will order for you in advance to make sure the delivery date is on time.

Prev: Martindale abrasion tester