Ore Abrasive Wear Tester_Sand Abrasive Wear Tester

Ore Abrasive Wear Tester_Sandstone Abrasive Wear Tester Under certain test conditions, it uses sliding friction to evaluate engineering plastics and powder metallurgy. resistant performance.

Meet the standard:
ASTM G65-04

Main application:
Ore abrasive wear tester_sandstone abrasive Under certain test conditions, the wear testing machine takes the form of sliding friction to improve the wear resistance of engineering plastics, powder metallurgy, alloy bearings, etc.

Structural features:
1. It consists of two parts: the main engine and the control system;
2. The main motor part includes the base, shaft and drive system, and weight Loading system, sample clamping part;
3. The control system includes the measurement and control and display settingsrumment part, and the two parts are connected by control cables.
Ore Abrasive Wear Tester_Gravel Abrasive Wear Tester Key Features:
1. Can change load, speed, time, friction partner material, surface test under different conditions of roughness, hardness and other parameters;
2. Test according to ASTM G65-04.

Main parameters:
1. Maximum test force: 200n
2. Indication Accuracy: ±1%
3. Spindle speed setting range: 10r/min-200r/min
4. Spindle speed accuracy: 1r/min
5. Temperature measurement range: room temperature-200℃
6. Test revolution: 1-9999999 settings 7. Standard block sample: 12X2X30mm
8. Standard sample (inner diameter*outer diameter*length): 222.5X12.7mm
9. Input voltage: AC 380V
10. Adjustment range of sand feeding system: 10 -500g/Min

Operating process:
1. Main shaft and drive system:
Themain shaft box is installed on the machine base. shaft is supported by a set of bearings with high rotational accuracy. The back of the main shaft is connected to the motor.
2. Weight loading system:
The right half of the base is the weightThe loading system can apply a maximum radial load of 200N to the sample on the spindle.
3. Sample clamping part:
The inner sample is fixed with an M20*2 nut on the 1:7 cone surface of the front end of the main shaft, and the outer sample is pressed and fixed with the outer surface of the booster rod in the sample slot.
4. Test force:
The application and removal of the test force is completed by the loading system, and the size is completed by loading weights. , The weights are divided into six types: 1N, 2N, 5N, 10N, 20N and 50N, so that the infinite loading of integers within the range of 1-200N is realized.
5. Speed, time and temperature:
1. The LCD screen displays the spindle speed and experiment time;
2. Refer to the instruction manual for adjusting and setting the frequency converter speed;
3. The test time control is completed by the instrument, and the test time can be preset by using the dial. When time is up, it will alarm and close for protection;
4. The instrument shows the temperature change of the sample during the test.

Logistics service:
1. Fast delivery: Our company has a large stock, and the spot products are delivered within 12 working hours, and 80% of the products are in stock. If our products are temporarily out of stock, our company strives to deliver the goods within 24 hours. If the customer needs the product urgently, our company can notify the factory to ship directly to the customer.
2. Receipt of the goods: Wwhen you receive the goods, please check whether the package is intact for the courier or postal staff. If others (family members, friends, companies, etc.) agree to sign for it, it means you acknowledge Received and verify that it is correct. Our company is committed to providing you with perfect service. If you encounter any problems after purchase, please contact us in time to negotiate and resolve them to avoid misunderstanding!

Prev: Oscillating Abraser_Sand Oscillating Abraser