Oscillating Abraser_Sand Oscillating Abraser

Oscillating Abraser_Sand Oscillating Abraser is used to evaluate the abrasion resistance of organic coatings, plastics, metals and other materials and to test transparent materials and coatings. properties on glass and lenses.

Product name:
Oscillating Abrasion Tester_Sand Grain Oscillating Abrasion Tester

Compliant standards:
ASTM F735, ARCA AR-C STP 5.2.5 ( Bayer Abrasion Test)
Main Application:
Oscillatory Abrasion Tester_Sand Grain Oscillatory Abrasion Tester is used to evaluate organic coatings, plastics, abrasion resistance of metals and other materials, where the properties of transparent materials and coatings applied to glass and lenses.

Key Features:
1. It is mainly usedto test the performance of transparent materials and coatings on glass and lenses. In addition, it can also be used to make organic coatings, wear resistance of plastic, metal and other materials;
2. The sample is fixed in the fixture at the bottom of the sand table, and the exposed height of the sample surface does not exceed 1mm. Put a uniform depth of standard abrasive media such as quartz sand or aluminum oxide into the sand table;
3. The sand table is driven by a specific driver to move back and forth, driving the abrasive media throughout the sand table to move. This random scraping pattern of abrasive media can simulate the wear and tear of products in daily life;
4. Allow users to use liquid abrasive slurry for wear and corrosion testing. Users can also perform a "Bayer test" on the lens by purchasing corresponding accessories. The purpose is mainly for comparisong with the reference lens
5. The test parameters can be adjusted and the user can choose the back and forth length (0.25 to 6 inches) and speed (100-200 back and forth per minute). In addition, the Oscillating Abraser allows users to test with different types of abrasive media, including quartz sand, aluminum oxide, corundum, and glass beads.

Test method:
1. Allows users to use liquid abrasive slurry for wear and corrosion testing. Users can also perform a "Bayer test" on the lens by purchasing corresponding accessories. The purpose is primarily for comparison with a reference lens.
2. The test parameters of the instrument are adjustable and the user can choose the back and forth length (1, 2, 3 or 4 inches) and speed (100-200 rounds per minute). In addition, the Oscillating Abraser allows users to test with different types of abrasive media, including quartz sand, aluminumminium oxide, corundum and glass beads.

Operating principle:
1. The sample is fixed in the fixture at the bottom of the sand table, and the exposed height of the sample surface does not exceed 1mm;
2. Place it in the sand table Standard abrasive medium such as quartz sand or aluminum oxide with uniform depth;
3. The sand table is driven by a specific driver to move back and forth, driving the abrasive medium to move in the entire sand table;
4. Due to wear and tear This random scratch pattern of the media simulates the wear and tear of the product in daily life.

Prev: Abrasive tester for paper tape_rca Abrasive tester