Sand Abrasive Wear Tester_Sand Abrasive Wear Tester

Sand Abrasive Wear Tester_Sand Abrasive Wear Tester Under certain test conditions, the test form of sliding friction is used to evaluate powder metallurgy, performance of engineering plastics and alloy bearings.

Main Application:
Sand Abrasive Wear Tester_Sand Abrasive Wear Tester Under certain test conditions, sliding friction test form is used to evaluate powder metallurgy, engineering plastics, alloys Bearing performance.

Key Features:
1. Tests can be performed under different conditions of changing load, speed, time, friction partner material, surface roughness, hardness and other parameters;
2. Test according to ASTM G65-04 standard.
Structural features:
1. It consists of two parts: themain engine and control system;
2. The main motor part includes the base, shaft and drive system, and weight Loading system, sample clamping part;
3. The control system includes the measuring and control and display instrument part, and the two parts are connected by control cables.

Main parameters:
1. Maximum test force: 200n
2. Indication Accuracy: ±1%
3. Spindle speed setting range: 10r/min-200r/min
4. Spindle speed accuracy: 1r/min
5. Temperature measurement range: room temperature-200℃
6. Test revolution: 1-9999999 settings 7. Standard block sample: 12X2X30mm
8. Standard sample (inner diameter*outer diameter*length): 222.5X12.7mm
9. Input voltage: AC 380V
10. Input power: 2.2kW
11. Overall dimensions (length*width*height): host 1350*544*1180; control box: 650*600*1650
12. Adjustment range of sand supply system: 10-500 g/min
Sediment Abrasive Wear Tester_Sand Abrasive Wear Tester Operation Process:
1. Main shaft and drive system:
The main shaft box is installed on the machine base, and the main shaft is supported by a set of bearings, which has high rotational accuracy. Spindle behind and motorized machine connection.
2. Weight loading system:
The right half of the base is a weight loading system, which can apply a maximum radial load of 200N to the sample on the spindle.
3. Sample clamping part:
The inner sample is fixed with an M20*2 nut on the 1:7 cone surface of the front end of the main shaft, and the outer sample is pressed and fixed with the outer surface of the booster rod in the sample slot.
4. Test force:
The application and removal of the test force is completed by the loading system, and the size is completed by loading weights. , The weights are divided into six types: 1N, 2N, 5N, 10N, 20N and 50N, so that the onedigital loading of integers within the range of 1-200N is realized.
5. Speed, time and temperature:
1. The LCD screen displays the spindle speed and experiment time;
2. Refer to the instruction manual for adjusting and setting the frequency converter speed;
3. The test time control is completed by the instrument, and the test time can be preset by using the dial. When time is up, it will alarm and close for protection;
4. The instrument shows the temperature change of the sample during the test.

Logistics service:
1. Fast delivery: Our company has a large stock of general measuring tools, and the spot products are delivered within 12 working hours, and 80% of the products are in stock, continuously improving inventory. If our products are temporarily out of stock, our company aims to deliver the goods within 24 hoursIf the customer needs the product urgently, our company can notify the factory to ship directly to the customer.
2. Receipt of the goods: When you receive the goods, please check whether the package is intact for the courier or postal staff. If others (relatives, friends, companies, etc.) agree to sign for it, it means you acknowledge Received and verify that it is correct. Our company is committed to providing you with perfect service. If you encounter any problems after purchase, please contact us in time to negotiate and solve them. Avoid some misunderstandings!

Prev: Ore Abrasive Wear Tester_Sand Abrasive Wear Tester