Operation steps of T109 multifunctional scraper

The T109 multi-function scratch counter integrates the five-finger scraping method and the cross scraping method, and is used to test the scraping performance of automobile interior and exterior materials. This is a test equipment independently developed and produced by our company, qisnun Precision Mechanical and Electrical Technology Co., Ltd., with high cost performance. , complete after-sales service.

Applicable standards:

, STD1024-3113

Operation steps:

p>

1. First: prepare the accessories and test samples

p>

2. A test method: five-finger scraping method

3. Load the weight on top of the shaft and install the scraping finger at the bottom of the shaft

4. Fix the test sample on the test platform and fix it, put down the connecting rod and put the scraping head in contact with the sample

5. Setthe parameters on the display screen and perform a friction test between the scraping head and Find the sample

6. Two testing methods: cross scraping method

7 .Install the weight and the scraping head, and install the test sample

8. In The parameters are set on the display screen, and a friction test is performed between the scraping head and sample

9. After the instrument test is completed, the samples are analyzed and compared to evaluate surface scratches and material durability.

As an enterprise integrating R&D, manufacturing, sales, training and service, Shanghai Fanbiao Textile Testing Technology Co., Ltd. is committed to bringing more testing instruments to the market, providing textiles, leather, combustion, automobile interiors. Test instruments for decorative materials, environmental climate aging, masksand protective clothing, etc. are also accepted for non-standard customization. Targeted testing can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.

Prev: Operation steps of T110 cent grid scratch tester