Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Operation steps of T110 cent grid scratch tester

Operation steps of T110 cent grid scratch tester

Author:QINSUN Released in:2023-12 Click:56

Lixin 430P Hundred Grid T110 Scratch Tester Benchmarking Instrument is used to test the scratch resistance and scratch performance of automotive plastic interior and exterior parts. This is a test equipment independently developed and produced by our company Qisnun Precision Mechanical and Electrical Technology Co., Ltd., cost-effective and comprehensive after-sales service.

Applicable standards:

PV3952, Volkswagen standard PV3974, GMW14688 General Motors standard, VDA621-411 paint adhesion, EN ISO 2409 coating grid cut test, test guidelines ASTM D3359 standard for testing coating adhesion by tape method

Operation steps:

1. First: place the accessories and the test sample is ready;

2. Put the test sample into the clamp, tighten and fix;

3. Install the scraping head at the bottom of the tguide rod, tighten and secure;

4. Install the weight on top of the guide rod and tighten it;

5. Turn on the switch and enter the LCD operation interface;

6. Set the speed and number of grids, spacing, stroke and other parameters;

7. The guide rail transmission, the scraping head and the material surface perform scraping movement;

8. When the set value is reached, the second window will automatically appear in the Stage dialog box;

9. Remove the screws on both sides and rotate the test fixture 90 degrees horizontally;

10. Re-adjust the speed, number of grids, spacing, stroke and other parameters, and scratch. The scraping head and the material surface make a scraping motion;

11. Automatically stop when the set value is reached and remove the sample toobservation ;

12. Close the instrument and the test ends;

13. After the instrument test is completed, take out the sample for analysis and comparison to evaluate the sensory level of the scratch after scraping, the color difference changes between the scratched area andthe unscratched area or surface coating of the sample after scraping. Peeling off the adhesive tape.

As an enterprise integrating R&D, manufacturing, sales, training and service, Shanghai Fanbiao Textile Testing Technology Co., Ltd. is committed to bringing more testing instruments to the market, providing textile, leather and combustion testing instruments. for categories, automotive interior materials, environmental climate aging, masks and protective clothing, etc. can also accept non-standard customization. Targeted tests can be carried out according to customer requirements beforepurchase to ensure that the instruments purchased are suitable.