Operation Steps of G285 Textile Airflow Resistance Tester

G285 Textile Airflow Resistance Tester is a testing equipment independently developed and produced by our company Qisnun Precision Mechanical and Electrical Technology Co., Ltd. It offers high performance and comprehensive after-sales service. It is mainly used to measure the air penetration resistance of textiles, wadding, space cotton, etc. It is one of the important ways to identify the comfort and hygiene of clothing and textiles, especially medical textiles. It can be widely used in polymer material production enterprises, industrial printing and dyeing enterprises, textile inspection departments, scientific research units, textile colleges, etc.

Applicable standards:

　BS EN 14683-2005, GB 19083-2010, GB2626—2006, YY 0469-2011 , YY 0969-2013

Main parameters:

　1. Air flow adjustment range: 10L/min-100L/min (600L/h-6000L/h)

　2. Air flow resistance measurement range: 0-1kPa

p>

　3. Test time: 1 set up to 99 hours optional

　4. Power supply: AC220V, 50Hz

　5. Machine power: 1.2KW

Operation steps:

First: prepare the accessories and test samples;

Remove the nut and open the clamp;

Put the prepared sample into the clamp;

Attach the clamp;

Turn on the instrument switch to enter the operation interface;

Clear previous data;

Turn the flow adjustment knob to make the air flow close to the standard value;

Built-in evacuation pump to continuously test sample suction resistance;

Read itvalue on the panel Pressure difference value, click to save;

After the test is completed, open the clamper and remove the sample;

Turn the flow knob Return to zero and turn off the instrument;

After the instrument the test is authorized, comparison and analysis Data will be carried out based on the air flow and pressure difference values ​​detected by the sample to judge its air flow resistance performance.

Prev: Operational steps of G286 medical mask synthetic blood penetration tester