Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Product Show > Medical protective clothing synthetic blood penetration tester

Medical protective clothing synthetic blood penetration tester

Author: Released in:2024-04-23 Click:33

Medical protective clothing synthetic blood penetration tester

Medical protective clothing synthetic blood penetration tester

Applicable scope:

Applicable to the resistance of protective clothing to synthetic blood penetration under different levels of test pressure.

Compliant with standards:

GB 19082-2003 Technical Requirements for Medical Disposable Protective Clothing - Synthetic Blood Penetration Test Method, etc

Working principle:

Under continuous pressure, test the protective clothing material with synthetic blood and visually inspect the penetration of synthetic blood on the material.

Preparation of sample:

Randomly cut three (75 * 75) mm test samples from each protective suit sample. When testing composite or multi-layer materials, the edges should be sealed and an area with a diameter greater than 57mm should be reserved for testing.

Instrument characteristics:

1. The instrument uses an air source that can provide a pressure of (0.5-30 ± 0.1) kPa to continuously pressurize the sample, without being limited by the space of the test site;

2. The pressure range can be freely set, with a setting range of (0.5-30) kPa;

3. Color touch screen display, Chinese and English operation menu, users can freely choose language operation;

4. The sample table is made of imported special aluminum profiles, which are lightweight, have a smooth surface, and will never rust;

5. The instrument adopts an imported special aluminum brushed panel, equipped with metal buttons;

6. The instrument is equipped with an automatic sample clamping device, which does not require manual clamping;

7. The test tank is equipped with a dedicated fixing device, which is convenient for customers to operate;

8. The test slot is made of high-quality 316 stainless steel, and the top is equipped with a high transparency and strength protection special cover;

9. Square metal blocking net: open space ≥ 50%; Bending at 30kPa ≤ 5mm;

10. Instrument time control accuracy ≤ 0 1 second;

11. The entire instrument casing is made of high-quality metal baking paint.

Technical indicators:

1. Pressure range and measurement accuracy: 0-0.04MPa (4mH2O) (31.4kg) Accuracy: ± 1kPa

2. Sample size: 75mm x 75mm, pressure area: 28.26 square centimeters

3. Power supply: AC220V, 50Hz, 100W

Prev:

Next: