When the motor cannot start and there is a hum when using the small submersible sand pump, it can be solved by the following aspects:
(1) Fault: The wire is broken or the switch is broken (single phase operation)
Treatment method: repair the broken wire and connect the fuse
(2) Fault: the bearing of motor guide blocks the shaft
Treatment method: repair or replace the bearing and repair the shaft
(3) Fault: there are foreign objects in the impeller and the pump body is stuck
Treatment method: remove the foreign matter
(4) Fault: The voltage is too low
Solution: adjust the tension
Prev: interprets the problems and solutions that are likely to occur when using chromatography columns-
Next: Interpretation of Common Troubleshooting Methods of Electrolyte Analyzer-