Fiber Lint Tester / Fiber Lint Abrasion Tester

Main Application:
Fiber Lint Tester/Fiber Lint Abrasion Tester is a single station abrasion tester to test the abrasion and lint of the sample. for evaluating the abrasion resistance of individual samples.

Test standard:
Toyota standard TIS 01208-00F21

Test principle:
According to prescribed method and experimental parameters, using a nylon brush or a single abrasive to rub and pill the fabric. Then, under the specified lighting conditions, compare the sample after pilling to evaluate the pilling level.

Instrument features:
1. High-definition LCD blue screen display control;
2. Equipped with acrylic transparent organic protective cover to ensure safety;
3. The cycle speed is 70 CPM (adjustable), with 20mm wide working amplitude.

Fiber fluff properties:
1. High strength: the strength of short fiber is 2.6-5.7cN/dtex, and that of high strength fiber is 5.6-8.0cN/dtex. Due to the low hygroscopicity, the wet strength is basically the same as the dry strength. The impact resistance is 4 times higher than that of nylon and 20 times higher than that of viscose fiber.
2. Good elasticity: The elasticity is close to that of wool. When extended by 5% to 6%, it can recover almost completely. The wrinkle resistance exceeds other fibers, that is, the fabric does not wrinkle, and the dimensional stability is good ~141cN/dtex, 2~3 times higher than nylon.
4. Good wear resistance: Wear resistance is second only to nylon, which is better than other natural fibers and synthetic fibers.
5. Good lightfastness: lightfastness is second only to acrylic fiber.
6. Good corrosion resistance: resistant to bleaching agents, oxidizing agents, hydrocarbons, ketones, petroleum products and inorganic acidsand. Dilute alkali resistance, not afraid of mildew, but hot alkali can make it decompose.

Prev: Fiber Fluff Abrasion Tester/Toyota Leather Perforation Tester/Fiber Fluff Tester