Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Special fiber abrasion tester / Special fiber abrasion tester

Special fiber abrasion tester / Special fiber abrasion tester

Author:QINSUN Released in:2023-03 Click:100

Main application:
Special Fiber Abrasion Tester/Special Fiber Abrasion Tester is mainly suitable for testing special fibers (PTFE fiber, high temperature fiber, aramid fiber, glass fiber, glass fiber , network cable) material wear resistance.

Technical parameters:
1. Number of test samples: 10 pieces;
2. Friction method: uniform speed;
3. Friction Speed: About (60±2) times/min;
4. Weight weight: 125g, 250g each 20 (can be combined into four levels of 125g, 250g, 500g, 750g);
5. Friction material: No 60 grinding wheel roller;
6. Computer configuration: standard configuration;
7. Output method: computer display or printing;
8. Friction times: the test stops when the sample is carried from the station, automatic counting;
9. Data output items: average friction times, coefficient of variation of friction times, single value, etc.;
10. The friction angle can beand adjusted and determined according to the experimental situation: 10°, 20°, 30°, 40°;
11. A shield is designed on the equipment to prevent fibers from flying randomly;
12. Power consumption: AC 220V, 50Hz , 2200W.

Technical characteristics:
1. Special fixing design for different samples, which will not damage the sample and ensure the sample can be clamped;
2. The non-contact photoelectric switch detects the wear of the sample; 3. The friction angle can be adjusted and can be selected and determined according to the experimental situation; 4. The abrasive material chooses the standard grinding wheel and roller of abrasive material on the market, which is convenient to obtain materials, and the abrasive material The installation structure is convenient for regular replacement;
5. Equipped with preloaded weights of different gears, which can be selected and used as followsaccording to the sample situation;
6. Good test reproducibility;
7. The computer automatically controls the detection and data processing, which can show the average wearing times and the coefficient of variation of wearing times of each batch of tested yarns.

Meet the standard:
FZ/T 01058-1999 \"Yarn Abrasion Test Method - Reciprocating Grinding Roller Method\"

Prev:

Next: