Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > DIN Rubber Abrasion Tester / DIN Rubber Abrasion Tester

DIN Rubber Abrasion Tester / DIN Rubber Abrasion Tester

Author:QINSUN Released in:2023-03 Click:91

This machine is suitable for elastic materials, rubber, tires, conveyor belts, shoe soles, soft synthetic leather.

The wear measurement of other materials has the characteristics of high performance, good reproducibility and easy operation.

Standards:
DIN 53516, JIS K6369, GB/T 20991 Nr. 8.3, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903, JIS K6264, GB/T9867, ISO4649, etc. 

Test method
Under the specified contact pressure and on a certain area, the sample and the sandpaper are at a certain angle, and the abrasion resistance of the sample when the sandpaper is rubbed at a certain level is measured . The sandpaper is wound on the surface of the roller, and the sample is pressed firmly on the roller with sandpaper, so that the sample moves laterally along the roller. The wear is generated at one end of the cylindrical sample. The mass loss value of the sample is measured and tested. Thedensity of the sample was used to calculate the volume loss. Rubber, tires, conveyor belts, soles, soft synthetic leather.

The wear measurement of other materials has the characteristics of high performance, good reproducibility and easy operation.
DIN Abrasion Tester Leather DIN Abrasion Tester Rubber DIN Roller Abrasion Tester?Test Principle:
Under the specified contact pressure and at the given area, the sample is at a certain angle to the sandpaper, to measure the abrasiveness of the sample rubbed on a certain level of sandpaper.
The sandpaper package is attached to the surface of the roller, and the sample is pressed firmly on the roller with sandpaper, so that the sample moves laterally along the roller. Wear is generated at one end of the cylindrical sample, the mass loss value of the sample is measured, and the volume abrasion is calculated based on the density of the sample.

Specifications:
Test piece: φ16mm, 6~15mm (D) Quantity: 4.2mm/roller per circle
Sanding cloth: 60#
Roller diameter: 150mm
Roller length: 460mm
Roller speed: 40rpm
Stroke schedule: 40m/ 20m
Wear rate: 0.32m/sec
Pitch angle: 3° Angle between test piece support shaft and roller vertical plane
Volume: 70×30× 30cm
Weight: 61kg
 Power supply: 1∮, AC220V, 3A

After-sales service:
1 We have an after-sales service team. The company has been engaged in the testing industry for more than ten years, and has accumulated rich practical experience;
2. Be able to solve various problems in time and quickly, and relieve customers from worry;
3. Spare parts are available, solving the problem of long delivery time for spare parts ordering;
4. Outsourcing maintenance services;
5. Long-term supply of various commonly used test instruments;

Prev:

Next: