din Abrasion Tester_Rubber Abrasion Tester_Sole Abrasion Tester

din Abrasion Tester_Rubber Abrasion Tester_Sole Abrasion Tester is used to measure the abrasion resistance of rubber tires, rubber shoes, tires, etc., to test the quality of rubber Products. During the test, the rubber material rubs against the mesh on the roller under a certain load and the wear of the sample is measured within the specified stroke.

Product Introduction

Main Usage :
Used to measure the abrasion resistance of rubber tires, rubber shoes, tapes, etc., to identify the quality of rubber products. During the test, the rubber material rubs against the mesh on the roller under a certain load and the wear of the sample is measured within the specified stroke.

Product Introduction:
Under the specified contact pressure and given area, the sample isand the sandpaper is at a certain angle and the test is measured The abrasive sandpaper produced by rubbing the sample to a certain level of sandpaper is wound on the surface of the roll, and the sample is pressed firmly on the roll with sandpaper to moving the sample laterally along the roller.

Standard:
DIN 53516, JIS K6369, GB/T 20991 No. 8.3, GB 20265-2006, GB20266-2006, SATRA T/M174, BS 903, JIS K6264, GB/T9867, ISO4649, etc.

Technical parameters:</stmelting
Test piece: φ16mm, 6~ 15mm (D)
Clamp load: 2.5N
Weight load: 2.5N, 5N
Clamp side displacement: 4.2mm/roll per circle
Sanding cloth: 60#
Roller diameter: 150 mm
Roller length: 460 mm
Roller speed: 40 rpm
Planned stroke: 40m/20m
Abrasion speed: 0.32m/sec
Inclination angle: 3° Angle between the support axis of the test piece and the vertical surface of the roller
Volume: 70×30×30cm
Weight: 61kg
Power supply: 1∮, AC220V, 3A

Service obligation:
1. ProductionProduct Quality Commitment:
The products sold are all produced by original brand factories. (with product-related certificates)
The product will be inspected before delivery by relevant technical personnel to ensure that all functions of the product are complete and undamaged before shipment.
We are willing to bear all responsibilities in case of quality problems (non-human damage) during the warranty period of the instruments we provide.
2. Commitment to delivery date:
The buyer and the seller will try to deliver the goods within 7 days from the payment date after negotiation of the goods transaction, and deliver the goods to the location according to the time required by the buyer.If the purchased product one in advancereported product, you must negotiate with us and request the purchase file to meet your needs in a timely manner.
3. Establish a cooperation concept, management system and long-term system:
1. Pre-sales service: Set up a special organization and relevant personnel of our company will help you choose the product in time.
2. In-sale service: In order to avoid unnecessary losses due to improper use of your users, our company will arrange relevant technical personnel to guide during the use process to ensure the correct use of the product, so that users can use it safely and conveniently .

Prev: Electric Cross Cut Tester-Erichsen430P Electric Cross Cut Tester Price