Automotive sealing strip wear resistance testing machine test load

Automotive sealing strip wear resistance testing machine is a testing equipment independently developed and produced by our company Qisnun Precision Mechanical and Electrical Technology Co., Ltd. It is cost-effective and has comprehensive after-sales service. It is used for testing various automotive lint and coating guide groove sealing strips. And the wear resistance of sponge coated door frame seals, door seals, trunk seals, etc., is widely used in the automobile production industry and its supporting enterprises.

Applicable standards:

Wear standard PV3313 in German Volkswagen technology TL52057, TL52417 and wear standard PV3366 in technical standard TL52641;

Standard of Chinese Ministry of Automobile Industry QC/T711-2004 Test method for flocking and wear resistance of automobile sealing strips;

National standard GB/T21282-2007 Wear test standard for rubber and plastic sealing strips for passenger cars and other types of automobile sealing strips.

Main parameters:

1. Type: 6 hammer electric type;

2. Test piece: Sampling of all types of sealant produced in strips;

3. Load: 250g, 325g, 500g, 1000g, 3000g (various counterweights can be customized according to standards);

4. Wear stroke: 0-160mm;

5. Adjustable height of wear head: 0-50mm;

6. Wear speed adjustment range: 0-90 times/min;

7. Counter: 0 to 999999 times.

Operation steps:

1. The test sample is fixed on the sample installation platform with double-sided tape and instant glue.

p>

2. According to Select and install the corresponding weight and friction head according toto the standard, adjust the height and lower the friction head.

　 3. Set the number of frictions according to the standard, and press the reset key to reset the counter.

4. Select the friction speed according to the standard, and adjust the speed potentiometer to the corresponding socket position.

5. Turn on the power switch and press the start test button, and the equipment will start the wear test until the counter reaches the set number of times, the equipment will automatically stop.

p> 6. Remove the sample to be tested and carry out data collection and analysis.

Note: During the technological process of wear test, pay attention to whether the equipment has an abnormal sound, if there is an abnormal sound, you should immediately stop the machine and report it to the relevant department for identification and repair.

AsCompany integrating R&D, manufacturing, sales, training and service, Shanghai Panbiao Textile Testing Technology Co., Ltd. committed to In order to bring more testing instruments to the market, we provide long-term testing instruments for textiles, leather, combustion, automobile interior materials, environmental climate aging, masks and clothing of protection, etc. We also accept non-standard customization, and all are processed before purchase. Can be made according to customer requirements. Perform targeted testing to ensure the purchased instrument is suitable.

Prev: Shoebel T106 Abrasion Tester Operation Steps