Abrasion Tester – Martindale Abrasion Tester

Description
The Martindale Abrasion Tester is used to perform wear tests at a cycle rate of 47.5 ± 2.5 cycles per minute (CPM) according to ASTM D4966, JIS L10096, ISO17704 and other specifications.
The device is used for abrasion testing of woven and knitted fabrics, non-woven/vinyl materials, leather, belts, gloves, socks, laminates, painted surfaces and a range of other materials. The tester has a counter for automatic counting and stopping of cycles and uses 120 volts.

Complies with standards:
ASTM D4970 ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2 ASTM D4966 ISO 12947 FZ/T 20020 BS 3424-24/5690 ISO 12947.1/12947.7/M&S P19/P19C NEXT 18/18a/18b ISO 5470-2 IWTO-40 JIS L1096 8.17.5 Method E Woolmark TM 112/196 BS EN 388/530/13770 ISO 20344

Field of application:
It can detect the wear resistance and pilling performance of different plants. Under a certain pressure, they become monsterser and the abrasive are subjected to continuous reversing friction and the degree of wear and pilling is assessed by comparison with the standard parameters. Touch screen operation with complete programmer, pre-programmed batch and total counts, individually set counts for each test head; 4 speeds selectable including standard speeds.

Technical parameters:
1. The number of stations: 9;
2. Count range: 0~999999 times
3. The maximum stroke: horizontal 60.5±0.5mm Longitudinal 24±0.5mm
4. Mass of pressurized material:
a. Holder: 200±1g
b. Clothing sample weight: 395±2g
c. Example furniture decoration weight: 594±2g
d Stainless steel butterfly: 260±1g
5. Effective friction diameter of grinding block:
A type 200g (1.96N) friction head (9KPa) ￠ 28.8 - 0.084mm
Type B 155g (1.52N) friction head (12KPa) ￠90 -0.10mm
6 . Relative moving speed between holder and grinding table: 20-70r/min (adjustable)
7. Loading hammerrquality: 2385±10g Martindale abrasion tester

Prev: Wyzenbeek tester – Wyzenbeek abrasion tester