YG502 Fabric Pilling Tester

Product introduction

Scope of application: YG502 type fabric Pilling tester is used for the pilling test of various woven and woven fabrics.

Related Standards: YG502 Fabric Pilling Tester Meets the requirements of GB/T4802.1 DIN 53863.2

Technical parameters:

1. Pilling motion trajectory: a circular trajectory with a diameter of 40 mm.

2. Adjustable brush: Use a nylon brush with adjustable effective height.

3. Sample pressure: the pressure of chemical fiber fabric is 590cN, the pressure of combed wool fabric is 780cN, the pressure of carded wool fabric is 490cN.

4. Specimen specification: round shape with a diameter of 112.8mm and an area of ​​100 square centimeters.

5. Time selection: 1~999999 can be arbitrarily set.

6. Sample back en repeating speed: 60 times/min

7. Brush height: adjustable from 1 mm to 12 mm;

8. Power supply: Ac220V 50Hz Power 60W

9. Dimensions: 550×250×360 mm (L×W×H)

10. Weight: about 35 kg

Test mode: According to the specified method and experimental parameters, the fabric is rubbed and pilled using a nylon brush or a single abrasive. Then, under the specified lighting conditions, compare the sample after pilling to evaluate the pilling level.

Instrument Features:

1. Scientific mechanical structure, stable rotation, no mechanical noise, no contact fatigue, suitable for long-term use.

2. When using standard nylon brushes, the stiffness of nylon filaments should be uniform to control the lint effect of nylon brushes.

3. Ergonomic design, the surface is molded by one-time injection molding, smooth and beautiful.

Prev: MC-7806 Needle moisture meter