Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > What are the grinding heads of the Taber Abrasion Testing Machine? This is the case

What are the grinding heads of the Taber Abrasion Testing Machine? This is the case

Author:QINSUN Released in:2022-12 Click:179


Product Introduction

What are the grinding heads for the Taber Abrasion Tester? According to Shanghai Qianshi, the accessories of Taber wear-resistant testing machine are mainly grinding heads/discs and sandpaper. Depending on the material tested by the customer, there are five types of grinding wheels and abrasive grains to choose from:

1. Calbrase* rubber and alumina abrasive elastic grinding wheels are used for testing software with harder samples, such as CS-10, CS-10F, CS-10W, CS-17.

2.calibrade* ceramic, silicon carbide abrasive non-elastic grinding wheel, used to test flexible samples, such as H-10, H-18, H-22, H-38

3. Wool Wheel: No abrasive granules, such as CS-5.

4. Rubber: No abrasive grains, which must be used with sandpaper, such as CS-0, S-32.

5. Tungsten approxrbide: Threading and tearing motion, used for elastic materials such as rubber, leather or floor mats, such as S-35.

It should be remembered that it is not enough to understand the grinding head, everyone should know its characteristics, which is beneficial for everyone to choose:


1. Sample holder: used to hold the sample. The size of the test piece is 16mm in diameter and 6-16mm in thickness (if it is not enough, it can be pasted).

2. Dust Cover: Protect the transmission part and prevent dust and improper wear.

3. Weight: The body weight of the grab is 2.5N, and 2.5N and 5N are each paid separately, which can be used in any combination.

4. Test piece rotating rack: Let the test piece rotate by itself.

5. Start switch

6. Grinding sand ring: use sandpaper 60 (size 400㎜ wide × 472.5 ㎜ long ) with double sidedadhesive tape to fix it on the runner, and the gap should not exceed 2㎜. (Attach 3 sheets randomly)

7. Standard glue: 175×116×8㎝ with random one piece, with a shelf life of about one year.

8. Circle Cutter: Used to cut test pieces with a diameter of 16mm, with a 13mm handle, which can be used with general drilling machines.