Toy comprehensive combustion performance tester

Toy comprehensive combustion performance tester

The children's toy comprehensive combustion performance testing machine is used to test the flame retardant performance of textiles and children's toy materials under fault and abnormal conditions. The instrument control system has a high degree of automation and has an automatic ignition function. Time digital display, convenient observation and recording, stable and reliable use.

The comprehensive combustion performance testing machine for children's toys meets the standards:

The fire and flame retardant requirements in Article 4.5 of SN/T 2144-2008 Basic Safety Technical Specification for Children's Furniture: Specific technical requirements and testing methods for the fire and flame retardant performance of various materials used in children's furniture;

Article 4.1.2 of GB14747-2006 (citing Appendix B of GB6675-2003) (GB6675-03 and EN71-2:2006)

Technical parameters of toy flammability tester:

1. The textile and children's toy combustion testing machine is composed of a testing part and a control part, adopting an integrated design, which is convenient for on-site installation and debugging.

2. The control system has a high degree of automation and has an automatic ignition function. Time digital display, convenient observation and recording, stable and reliable use.

3. Power supply: AC220V ± 10%/50Hz.

4. Burner: According to the requirements of ISO6941-2003.

5. The throat diameter of the burner is Φ 0.19 ± 0.02mm, 75mm long mixed air outlet aperture Φ 1.7, the air inlet is 4 x Φ 4mm.

6. The gas source for the test flame is suitable butane and propane gas, which is convenient to use and easy to purchase.

7. Flame height: The flame application time (Ta) can be adjusted within the range of 20mm ± 2mm~40mm ± 3, and can be adjusted within the range of 0-99 minutes and 99 seconds, with automatic control.

8. The combustion duration (Ti) can be recorded and adjusted within the range of 0-99 minutes and 99 seconds.

9. The experimental process is automatically controlled. When the cotton thread used as a marker is burned, the heavy hammer falls and the timing starts and ends automatically.

10. Flame test angle: 0 °~45 ° (adjustable).

11. The test fixture is based on the GB6675-2003 standard, consisting of two U-shaped metal plates with internal dimensions of 600mm x 80mm.

12. Configure 2 bundles of 100% pure cotton thread with a high thread density of 50tes, which have been mercerized.

Prev: T106 Shaw Wear Tester