AQUILA is a thermal tensile testing platform that can perform EBSD analysis under a scanning electron microscope. Its unique design allows it to operate in short focal lengths while retaining enough space to either or closely approach two EBSD detectors (20 ° angle domain): one for ultra-high resolution observation and the other for ultra fast acquisition.
Due to its various clips, AQUILA is very versatile. The instrument can perform tensile testing on flat bone samples, compression testing on cylindrical samples, 3 or 4 point bending testing on strip materials, and even achievable low cycle fatigue testing under EBSD analysis.
technical parameter
Testing: tensile, compressive, bending, low cycle fatigue testing
EBSD compatibility: Yes (compatible with 2 cameras)
Maximum capacity of force: 3.5kN (785 lbf.)
Dimensions: 258 x 209 x 51 mm (10.15 x 8.25 x 2.00 in.)
Weight: 2.7 kg (5.95 pounds)
Cross head travel: 30 mm (1.20 in.)
Maximum speed test: 3.000 mm/min (0.118 in./min)
Minimum rate test: 0.006 mm/min (0.0002 in./min)
Displacement sensor: resolution+/-20nm
Force sensor:
Linear<+/-0.5% of F.S
Lag<+/-0.5% F.S
High precision, efficiency, and stability
Explanation:
1. Using the most advanced technology in mechanical transmission efficiency, with a working speed range of 0.1-300? Between m/s, the force reaches 3.5 kN.
2. The coupling of precision guide rails and transmission systems increases stiffness.
3. The measurement of displacement and force has excellent accuracy.
4. Mechanical and electronic safety mechanisms protect users and prevent any damage during use, as well as complete ongoing automated testing.
5. The force is on the same plane rather than on the test sample to prevent parasitic bending moments.
AQUILA mini
AQUILA mini is a scaled down version of the instrument AQUILA, which is a thermal mechanical testing device compatible with optical microscopes and scanning electron microscopes.
The AQUILA mini also has incredible diversity of features, with a variety of clips that can be easily installed inside the machine and used for tension/compression testing, 3 or 4 point bending testing, and biaxial testing. In order to heat the sample to+650 ° C, users can also incorporate heating equipment into typical tensile/compression tests.
Technical parameters:
System description:
Testing: tension, compression, bending, low cycle fatigue, biaxial, thermal application
Maximum capacity of force: 2.0 (kN) 450 (lbf)
Cross head travel: 2 x 25 (mm) 2 x 0.98 (in)
Maximum rate test: 1.200 (mm/min) 0.0472 (in./min)
Minimum rate test: 0.006 (mm/min) 0.0002 (in./min)
Size and weight:
Instrument weight, approximately 1.4 (kg) 3.09 (lb.)
Dimensions (Lx W x H) 185 x 132 x 34 (mm) 7.3 x 5.2 x 1.3 (mm)
Sample size:
Stretch sample (Lx W x H) 50 x 10 x 1 (mm) 2.0 x 0.4 x 0.04 (in.)
Bending sample (Lx W x H) 40 x 5 x 5 (mm) 1.6 x 0.2 x 0.2 (in.)
Biaxial sample (Lx W x H) 30 x 30 x 1 (mm) 1.2 x 1.2 x 0.04 (in.)
Sensors:
Displacement sensor displacement measurement: optical encoder
Resolution: 20 (nm)
Force sensor: force strain gauge
Prev: ABET pore distribution instrument
Next: Blue light safety sensor