taber wear resistance testing machine

Instrument Introduction:

TABER abrasion resistance and abrasion resistance tester can transmit the friction of the abrasive material against the sample under a certain load and a certain speed. It can be used to measure the wear resistance of the sample, such as loss of mass, loss of thickness, change of light transmittance, etc. Cutting discs are pre-ground according to standard methods and tested with a high degree of reliability.

Field of application:

TABER abrasion resistance and abrasion resistance tester is suitable for testing the surface abrasion resistance of flat materials: suitcase, carpets, cardboard, clothing, glass , plastic coatings, ceramic tiles, sheet metal, paints, varnishes, decorative boards, high voltage boards, plastics, textiles, resilient floor mats, traffic paint, anodizing, blankets, electronic components, decorative panels, wax, labels, leather cases, dentistrymaterials, car interiors, resins, furniture, etc.

Test standard:

ISO 9352 plastic grinding wheel method for determination of abrasion resistance

ISO 5470 Rubber or Determination of Abrasion Resistance of Plastic Coated Fabrics

ISO 7784 Paints and Varnishes Determination of Abrasion Resistance Part 2: Rotating Rubber Wheel Method

ASTM D1044 Abrasion Abrasion of Transparent Plastic Surfaces Abrasion Test Method

ASTM D3884 Test Method for Dust Abrasion

ASTM D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by Abraser

GB/T 5137.1 Test Methods for automotive safety glass - Part 1: Mechanical properties test

QB/T 2726 Determination of abrasion resistance in physical and mechanical tests of leather

DIN 53109 Test of paper and board. Determination of abrasiveness by friction wheel method

Instrument features:

Simple and user-friendly operationpanel

Equipped with LCD display to show real-time speed

Equipped with speed control knob, the speed can be adjusted from 30-75 rpm

It number of wear circles can be preset, and the setting range is 1-999999 times

The rear arm can be equipped with a balance weight to accurately balance the weight of the suspension arm, to achieve the required pressure of 125g ranges required by the ASTM standard as well as other standards and the special pressure requirements of users

The height of the suction wall of the vacuum pump is adjustable. To meet the needs of test materials of different thicknesses, efficiently remove dirt and improve test accuracy.

Technical parameters:

Indicator parameters Rotation speed 30-75r/min Adjustable (digital display) Sample surface diameter 100mm Test Sample table diameter is 113 mm and the adjustment range of het number of turns is 1-999999 air arm pressure 250g weight (according to purchase) balance weight, 250g, 500g, 750g, 1000g double wheel pressure range 125g, 250g, 500g, 750g, 1000g, 1250g, etc. Vacuum arm height adjustable power supply 220V, 50Hz form Dimensions 220mm × 380mm × 300mm Weight 20kg

Prev: Testing machine for testing rubber rollers