Reciprocating wear testing machine

Reciprocating wear testing machine

Compliant with standards:

ASTM F2496, ISO 1518-1, ISO 1518-2, GME 60248, D44 1221, D14 1055-2004, D42 1775-03-2001, etc

Application features:

The reciprocating wear machine is used to test the scratch resistance and wear resistance of coatings, plastics, decorative fabrics, automotive interiors, velvet fabrics, etc. The LCD screen controls and displays the test process, and can set parameters such as the number of reciprocating wear, travel distance, and reciprocating speed according to user needs. Unique friction arm design enables replacement of different friction heads. Implement precise pressure control based on the principle of lever balance. Fully meet the different requirements of different standards for friction form, friction head, pressure, etc. During the experiment, the test sample is fixed on a horizontal sample stage and is worn away with the horizontal movement of the sample stage under the specified abrasive and load. The other end of the testing arm is equipped with weights to maintain the balance of the testing arm, ensuring the accuracy of the surface loading of the sample. The height of the abrasive and load rack can be adjusted to suit the testing of samples at different heights.

Instrument principle:

The tested product is fixed on a horizontal table and is worn out with the horizontal movement of the water table under the specified abrasive and load. Using the principle of leverage, the other end of the testing arm is matched with a weight to maintain the balance of the testing arm, ensuring the accuracy of the sample surface load and the reliability of the test results. The height of the abrasive and load rack can be adjusted to suit the testing of samples at different heights. In addition, different friction media can be used to test the wear resistance of different products according to the different requirements of customers.

Technical parameters:

Travel range: 6-120mm adjustable

Speed range: 1-100 reciprocating/min stepless adjustable

LCD screen control, can set parameters such as speed, number of reciprocating movements, etc

Real time display and control of test status on LCD screen with two workstation design, saving test time

Meets multiple standard requirements and can be equipped with weights and friction heads according to user needs

Weight: approximately 48.5kg

Size: 532mm * 471mm * 630mm (W * D * H)

Power supply: 220V, 50HZ, 1A

Optional accessories:

Host: 1 unit

Test arm kit: 2 sets

Weight kit: 6 pieces (1N, 2N, 2.5N, 5N, 10, 24N)

Ø 15 grinding head: 2 (semi circular R18, 40mm long)

Sample fixing bracket: 2 sets

Brush: 1

Grinding head repair sandpaper: 1 pack (20 pieces)

Stainless steel abrasive fixation

CS-10 grinding head: 2 pieces

H-18 grinding head: 2 pieces

Prev: Stone impact testing machine