Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Professional performance Nanovea friction and wear tester

Professional performance Nanovea friction and wear tester

Author:QINSUN Released in:2023-04 Click:122

Professional performance Nanovea friction and wear tester is a full-featured friction and wear equipment, which uses linear reciprocating and pin-on-disk on one device can realize Working mode, and can be used with Standard Group\'s 3D surface topography instrument to detect the depth, area, volume, roughness and three-dimensional surface topography before and after wear

Product Introduction

Main Application:
Nanovea Friction and Wear Tester / The high-frequency reciprocating friction testing machine is a fully equipped friction and wear equipment, which can realize two working modes of linear reciprocating motion and pin disc on one device, and can be used with the three-dimensional surface topography instrument of the standard group to measure the depth before and after wear, opplain, volume, roughness and three-dimensional surface topography detection. At the same time, it has high temperature, humidity, depth, atmosphere, lubrication module and various modules to choose from, which is an ideal choice for scientific research and industrial customers.
Meets ASTM G99 and ASTM G133 standards;

Product Features
Accurate friction and wear measurement
Pen-operated Disc operation mode and linear reciprocating working mode
Adopt ultra-high precision motor and precise positioning device
The software automatically displays the coefficient of friction of the wear rate
Speed: 0.1-2000rpm, up to 6000rpm
Yes Test under different gas content
Can simulate the test under liquid environment
The temperature can reach 1000oC
Can perform three-dimensional surface topography test

Productapplication
Advanced materials (ceramics, metals, polymer materials), lubricants, oil additives, self-lubricating systems, quality control, etc.

Technical parameters:
1. Positive load range: 30mN-60N
2. Friction range: 20N (40 N option)
3 .Friction force resolution: 0.4 mN
4. Measuring temperature range: 1000°C
5. Rotational movement mode: speed: 0.1-2000 rpm (option max. 6000 rpm), test radius: 50 mm, test torque: 1270 mN.m

Prev:

Next: