Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Precautions for using the Martindale Abrasion Tester

Precautions for using the Martindale Abrasion Tester

Author:QINSUN Released in:2023-03 Click:179

With the continuous development of my country\'s clothing, leather and other industries, the use of Martindale wear-resistant tools is becoming more and more frequent and the role played It is It is also increasingly clear that it offers effective solutions to problems in daily work. It is especially suitable for pressure testing the abrasion resistance and pilling degree of knitted fabrics, woolen fabrics, imitation leather, synthetic leather, etc. The instrument has a generous appearance and a touch-sensitive display. The interface is very simple and the testing efficiency is very fast. But in the actual operation and using process, there are actually many things that need our attention.

Firstly, it must be connected to a power supply that corresponds to the rated power during use, so as not to cause damage to the Martindale Abrasion Tester during use.

Second, when the shell is grounded, it must have a good aground condition and the ground resistance should be less than one ohm.

Third, remember that there should be no collisions during the installation or usage process, so as not to damage the machine and affect the results of the experiment.

Fourthly, since the Martindale Abrasion Tester is a touch screen, during use please remember to use only your fingers to operate it and do not use hard objects to press it, to avoid damage to the.

Fifth, it should be cleaned up every time after the work experiment is over.

Sixth, test precautions:

1. The friction cloth cannot be used repeatedly, and a friction cloth must be replaced every 50,000 times of friction;

2. Sheep The felt can be used repeatedly until the surface is worn or stained;

3. The insole must be dressed first and then the Martindale abrasion testbe carried out;

 

Prev:

Next: