Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Pilling tester with analytical orbit method

Pilling tester with analytical orbit method

Author:QINSUN Released in:2022-12 Click:167

Product Description:

Circular Orbit Method Pilling Tester uses linear guide rail as a sliding gauge to test the pilling condition of wool fabrics, pure cotton, chemical fibers , blended, knitted and woven fabrics to identify product quality Process effect, Shanghai Qianshi Precision Electromechanical Technology Co., Ltd. is a textile testing equipment manufacturer who can provide textile testing equipment for various experimental needs. Customers in need are welcome to inquire in time.

Principle of the test:

Use a nylon brush and abrasives or simply abrasives to rub and fluff the fabric, then in the specified lighting conditions , Compare the sample after pilling with the standard photo and evaluate the degree of pilling.

Pilling Tester Analysis Using Circular Path Method

Main parameters:

1. The contact gap between the grinding head u and the grinding table: ≤0.2mm;

2. The parallelism between the grinding head and the grinding table: ≤0.3mm;


3. The relative movement track of grinding head and grinding table: 40±1mm;

4. Nylon brush surface has height difference: less than 0.5mm;

5. Grinding table float speed: 60±1 times/min;

6. Grinding head weight: 490cN±1%;

7 . Big hammer weight: 290cN±1%;

8. Small hammer weight: 100cN±1%;

9. Hour selection: 1—9999.

Setting up the instrument:

1. Place it on a sturdy workbench and lay it flat on the workbench. The rubber mat prevents the instrument from slipping during operation.

2. Adjust the foot nuts afin that they are level.

3. Check whether the power supply voltage meets the requirements of 220 V ± 10%, connect the ground cable and insert it into the socket.

Lint Test:

1. Take the sample and fix it correctly and firmly in the sample holder . Set back friction times according to GB/T4802.1-97.

2. Choose the sampling pressure according to the regulations. If you need to increase the weight, you can clamp the required weight on the feed shaft.

3. Place the specimen holder so that the specimen is in contact with the plane of the brush.

4. Press the \"RUN\" button, the instrument can rotate according to the set number, and the instrument will automatically stop when the set number is reached.

Pilling test:

1. Set the number of counters according to GB4802.1-97.

2. Take the scalentillon and fix it correctly and firmly in the specimen holder.

3. Lay the specimen holder down so that it touches the grinding plane.

4. Press the \"RUN\" button to let the instrument do the pilling.

5. After automatic power off, turn on the sample holder, remove the sample after grinding, and test for evaluation.

The above is the detailed analysis of relevant content that Shanghai Qianshi has answered in detail for you. If you want to buy products, please feel free to visit:13671843966.