Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Pilling tester by circular trajectory method Pilling test أداة الاختبار –

Pilling tester by circular trajectory method Pilling test أداة الاختبار –

Author:QINSUN Released in:2023-10 Click:61

The circular path method pilling tester is used to test the pilling conditions of woolen fabrics, pure chemical fiber cotton, blended, knitted and woven fabrics to identify product quality and effects. of the process. It is independently developed and produced by qisnun Precision Electromechanical Technology Co., Ltd. testing equipment.

Complies with standards:

GB/T4802.1, JIG040, DIN53863.2

Test principle:

According to the methods specified and experiment parameters, use a nylon brush or abrasive alone, or scrub only with the abrasive in a controlled humidity state to cause friction and pilling of the fabric. Then, under the specified lighting conditions, take a photo of the sample after pilling to evaluate the degree of pilling. .

Fuzzing test:

1. Take the sample and fix it correctlyment and firmly into the sample chuck. Set the number of frictions for the counter according to GB/T4802.1-97.

2. Select the sample weight according to the regulations. If you need to increase the weight, tighten the required weight onto the chuck arbor.

3. Position the sample mandrel so that the sample is in flat contact with the brush.

4. Press the “RUN” button, the instrument can rotate according to the set number of times, and the instrument will automatically stop when the set number is reached.

Pilling test:

1. Set the number of counters according to GB4802.1-97 regulations.

2. Take the sample and fix it properly and firmly in the sample chuck.

3. Lower the sample mandrel so that the sample is in contact with the abrasive plane.

4. Press the “RUN” key to make the instrument do pilling work.

5. After automatic shutdown, raise the sample chuck and remove the ground sample for evaluation.

As an enterprise integrating R&D, manufacturing, sales, training and service, Shanghai Fanbiao Textile Testing Technology Co., Ltd. is committed to continuously providing more testing instruments to the market and providing long-term textiles, the testing instruments for leather, combustion, automobile interior materials, environmental climate aging, masks, etc. can also accept non-standard customization. Targeted testing can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.

Prev:

Next: