Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Product Show > Phototherapy bed monitoring table

Phototherapy bed monitoring table

Author: Released in:2024-04-11 Click:28

Phototherapy bed monitoring table

Phototherapy bed monitoring table

The phototherapy bed monitoring table can measure the UV-B radiation spectrum and UVC radiation medical results. The instrument displays the hourly UV-B intensity (also known as SUV sunburn ultraviolet) at the minimum erythema dose (MED/Hr), which is recognized as a potential clinical measurement for sunburn. The UVC detector measures the light intensity between 275 nanometers and 285 nanometers and displays UV-C radiation in milliwatts per square centimeter. These measurements are based on the output of the European standard phototherapy bed.

Product application:

Monitor and measure the phototherapy bed by measuring its output volume

Test meter specifications:

UVB (SUV) range: 0... 19.99 MED/Hr UVC

Range: 0... 19.99 mW/cm2

Resolution: 0.01 MED/Hr or mW/cm2

Operating temperature: 0 to 50 ° C

Dynamic range:>2 * 105

Accuracy: 2%

FS nonlinearity in all ranges: maximum 0.02%

FS in each temperature coefficient range: maximum 50 ppm/° C

Power supply: 4XAA nickel cadmium battery or alkaline battery; External 9-12V DC or AC adapter

Size: 4 "W x 7.6" H x 1.75 "D (10x19.5x4.5 cm)

Weight: 17 ounces (480 grams)

Product features:


SL-3201 will automatically configure for new sensors when connected. No entry into the program and calibration factors. The settings and algorithms of the detector are encapsulated within the detector. The detector is ready for use with the suitcase.

Convenient portability

SL-3201 has powerful features, but its size can be held by hand. Two detectors can be connected to a 1ft/5ft cable simultaneously for easy measurement. Rechargeable batteries are allowed to run continuously for 30 hours.

data record

Up to 1024 data records can be stored in internal non-volatile memory. The user set time interval (1 minute to 2 hours) can automatically or manually manipulate stored content. The unified recording structure of all detectors simplifies data management.


Each data sample is accompanied by a set of auxiliary information, such as date, time, detector type and serial number, current unit used, user set scale factor, detector calibration expiration date, and a set of flags used to display the test table. This is a good example of the interface specifications for Best Laboratory Testing (GLP) and Laboratory Information Management Systems (LIMS).

Noise resistance

The detector inside the enclosed metal casing completes signal amplification. The signal is transmitted to PMA2100 through shielded cables (providing high immunity to EMI and ESD).

Automatic unit conversion

The measurement results can be displayed in multiple units for specific measurements. A button changed the unit selection. Custom units and conversion algorithms can be programmed onto detectors. Dose integration. Dose integration can be initiated from the keyboard or remotely.

computer interface

Transfer the collected data to a PC connection through a USB interface. The organizer of PMA, based on Windows software, facilitates data retrieval, archiving, and presentation.

User can set alarms

The alarm can be set to the instantaneous value or integrated dose of each detector. The alarm settings are stored in the detector, which can be automatically recalled during use.

Isolated digital input/output

Controlled by SL-3201 through optical isolation digital I/O, the input can start or stop dose collection, while the output dose value is triggered by an alarm. Controlling radiation dose is applicable. The power relay can be used as an accessory.