Operation steps of UV aging tester

The UV aging tester is independently developed and produced by our company Qisnun Precision Mechanical and Electrical Technology Co., Ltd. This is experimental equipment equipped with imported lamp tubes. It can meet the requirements of coatings, inks, adhesives, plastic products and other industries, and is used to evaluate plastics and rubbers. , paints, aluminum-plastic panels, automobile safety glass, textile printing and dyeing and other materials.

Main parameters:

1. Light source: Lamp wavelength: UVA-340/UVB-313; Lamp quantity: 8; Lamp power: 40W/tube;

p>

　2. Simulated environment: temperature, humidity, light, spray, condensation;

　3. Temperature range: RT+10℃～70℃;

4. Humidity range: ≥95%R.H;

5. Board temperature: 40℃~65℃;

6. Distance between lamps: 35 mm;

7.Testing time: 1～9999S, M, H adjustable;

8. Sample quantity: about 40 pieces;

9. Irradiance range: <50W/㎡.

Operation steps:

1. First: prepare the accessories and test samples;

　2. Install the sample into the sample clamp and put the sample clamp into the test box;

　3. Start the instrument and enter the test interface LCD operation;

　4. Settings Settings for condensation, irradiation, rain, etc. ;

5. Click Run, the UV light will be turned on in the test chamber (in the actual test, do not open the cover after the light is turned on);

6. The sample starts testing in the box;

7. When the set time is reached, open the box and remove the sample;

8. After testing, close the instrument and remove the sample. Analyze and compare to evaluater the resistance of materials to aging and UV fading.

Shanghai Fanbiao Textile Testing Technology Co., Ltd., as an enterprise integrating R&D, manufacturing, sales, training and service, is committed to putting more testing instruments to the market and provide long-term textiles, leather, combustion test instruments, automobile interior materials, environmental climate aging, masks and protective clothing, etc. can also be customized to meet non-standard requirements. Targeted testing can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.

Prev: Operation steps of T115 automotive interior material fusion tester