Operation steps of T114 atomization tester

T114 atomization tester is suitable for high temperature volatile atomization testing of automobile interior materials, such as dashboards, buttons, seat cushions, floor leather, plastic particles, carpets, leather, adhesive products, ceiling materials, etc. testing equipment independently developed and produced by our company, Qisnun Precision Mechanical and Electrical Technology Co., Ltd., with high cost performance and comprehensive after-sales service.

Measuring method:

Gravimetric method:

DIN 75201-B, ISO 17071, DIN EN 14288-B, ISO 6452-B, SAE J1756, PV 3015, GME 60326-A, GMW 3235-B, TSM05036-B, D45 1727

Gloss method/reflection method:

DIN 75201-A, DIN EN 14288- A, ISO 6452-A, PV 3015, PV 3920, TSM05036-B, D45 1727

Haze method:

DIN 75201-A, HES D6508-95, MS 300-54

Operation steps:

1. First: prepare the accessories and test the samples

2. Place the prepared sample into the misting cup

3. Prepare a piece of aluminum foil, weigh it on the scale and record the value

4. Place the aluminum foil. Plate of paper and glass, placed above the steam. cup

5. Set the circulation parameters of the low temperature control box

6. Set the temperature and time parameters of the host

7 .Start the instrument, reach the timing time, remove the aluminum foil from the workstation, put it back into the balance, weigh it and record the value

8. After testing of the finished instrument, measure the atomization value of the glass plate or aluminum foil or weight is measured and compared with the data before condensation to obtain the atomization volatilization characteristics of the sample.

Shanghai Fanbiao Ttextile Testing Technology Co., Ltd., as an enterprise integrating R&D, manufacturing, sales, training and service, is committed to bringing more testing instruments to the market and providing long-term textiles, LéaThe testing instruments for combustion, automobile interior materials, environmental climate aging, masks and protective clothing, etc. can also be customized to meet non-standard requirements. Targeted testing can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.

Prev: Operation steps of T201 gravel impact testing machine