Operation Steps of G233A 45 Degree Flammability Tester

G233A 45 degree flammability tester is mainly used for testing the flame retardant properties of clothing textile materials, toy fabrics, upholstery fabrics and other fabrics. This is testing equipment independently developed and produced by our company, Shanghai Panbiao Textile Testing Technology Co., Ltd., and provides high and comprehensive, cost-effective after-sales service.

Complies with standards:

CFR 1610, ASTM D1230, NFPA 702, CA TB117, BIFMA, GB/T14644

Operation steps:

First: prepare the accessories and test the samples;

Put the test samples into the fixture and fix them;

Place the fixture containing the sample into the test box;

Hook one end of the cotton thread to the weight, then pass it through the wiring ring, the hook of the luminaire and the solid coil. , etc. to connect the wirel;

Adjust the position of the sample clamp;

Use the igniter to light the burner;

Turn on the instrument switch and enter the LCD operation interface;

Set the ignition time;

Start the test;

The igniter turns on automatically and the sample to be tested begins to burn;

After 5 seconds, the timing starts automatically;

When the cotton thread is burned, the weight automatically falls, the timer ends, and the burning speed is obtained;

Click to print;

At the end of the test, remove the sample clamp and close the instrument;

Based on the detection of the flame propagation time in the direction of 45 degrees after the material ignited, as well as the intensity and burning speed of the material, l The flammability of the product is evaluated to assess combustion performance. of the product.

Prev: Operation Steps of G233F Car Interior Level Flammability Tester