Mask surface moisture resistance tester
Main use:
The mask surface moisture resistance tester is used for testing the surface moisture resistance of medical surgical masks, disposable masks, textile fabrics, and other materials.
Applicable standards:
YY0469-2011 Medical Surgical Mask;
GB/T 4745;
GB/T 19083-2003-2011;
ISO 4920;
AATCC 42;
AATCC 22.
Detection principle:
Quantitative distilled water is sprayed at a 45 ° angle through a standard nozzle on the sample to be tested 150mm below the nozzle. After testing, the surface of the sample is compared and graded with the standard drawing card.
Main parameters:
1. Glass funnel: Ф 150 x 150 (capacity 500ml);
2. Sample security angle: 45 °;
3. Distance between nozzle and sample center: 150mm;
4. Water spray volume: 250ml;
5. Funnel diameter: 150 ± 5mm;
6. Funnel height: 195 ± 10mm;
7. Test height: 150 ± 2mm;
8. Test medium: clean water;
9. Control mode: manual.