Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Instructions for using the Martindale Abrasion Tester

Instructions for using the Martindale Abrasion Tester

Author:QINSUN Released in:2023-03 Click:144

The main function of the Martindale Abrasion Tester is to test the abrasion resistance and pilling performance of various plants. Under a certain pressure, the sample and the specified abrasive are subjected to continuous reversing friction, and the degree of wear and pilling is evaluated by comparison with the standard parameters. Touch screen operation with complete programmer, pre-programmed batch and total counts, individually set counts for each test head; 4 speeds selectable including standard speeds.

1. Test standard:
ASTMD 4970;ISO12945.2;GB/T4802.2/13775/21196.1/21196.2; ASTM D4966; ISO 12947; FZ/T 20020; BS3424-24/5690; ISO12947.1/12947.2; M&S; P17/P19/P19C; NEXT 18/18a/18b; ;Woolmark TM112/196;BS EN 388/530/13770 ;ISO20344

2. Test Range:
Gellowen Martindale Abrasion Tester can measure the weight loss of the fabric due to friction, change in appearance, abrasion, etc. kcan reflect the test of the fabric\'s abrasion resistance, and at the same time it is used to test the pilling performance of the fabric.

3. Advantages of the instrument:
(1) High test accuracy, suitable for drawing accurate Lissajous curves.
(2) The instrument complies with various international and national standards and can complete the tests specified in each standard.
(3) The company is equipped with complete testing accessories.
a. 9 sets of sample clamps
b. 9 pieces of 9 KPa and 12 KPa weights
c. A set of 38 mm and 140 mm samplers
d.? 38 mm , Ø 140 mm sampler support plate, each piece
e. A set of pilling test set
f. A set of SM50 standard sample photo
g. A set of EMPA standard pilling sample photo and a piece of SM-25 standard emery cloth 1.6m*5m
h. One set of standard foam 1.5m*0.5m (4 pcs/set)
i.e. One piece of standard felt fleece
e.g. 20 pieces of felt discs of 90 mm
k. 50 pieceseach of 38mm and 140mm sampling sheets
l. Other necessary accessories recommended by the manufacturer.
(4) The company has a high-quality after-sales service system and a strong R&D team, which can solve any problems during the test.

More about Martindale Abrasion Tester: http://www.abrasiontesters.com/productlist/list-5-1.html