Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Detailed analysis of Martindale Abrasion Tester parameters

Detailed analysis of Martindale Abrasion Tester parameters

Author:QINSUN Released in:2023-03 Click:158

1. Scope of application:
Applicable to the test of abrasion resistance and apparent pilling performance of woven fabrics, knitted fabrics, non-woven fabrics, decorative materials, coated fabrics, etc.

2. Compliant with the standard:
1. International Standard:
ISO 5470: Rubber or plastic coated fabric - Determination of abrasion resistance
ISO12945.2: Fabric fluff Determination of pilling Martindale method ISO12947: Determination of abrasion resistance of fabric by the Martindale method ( Martindale) for textiles
2. American Society for Testing Materials: ASTM? Abrasion resistance test Martindale method
3. Chinese National Standard:
GB/T 4802.2: Pilling Properties of Textile Fabrics Determination of
GB/T21196: Determination of Abrasion Resistance of Martindale Textile Fabrics (Martindale Abrasion Tester, Determination of Sample Breakage, Determination of Mass Loss, Evaluation of appearance change)
GB/T13775: Cotton, linen, spun silk woven fabrics abrasion resistance test
4, EU-norm:
EN ?ISO?12947 Textile Martindale method for determining the abrasion resistance of fabrics
5, British Standards Institution
BS?ISO12947 Textiles use the Martindale method to determine the abrasion resistance of fabrics , etc.
Third, working principle:
The tested substance is placed on top in the specimen holder and rubs against the abrasive mounted on the grinding table. The friction trajectory is a Lissajous figure. After the specified friction phase according to the test requirements, remove the fabric and calculate the abrasion resistance index or evaluate the fuzzing and pilling level of the sample through visual description.

4. Technical characteristics and technical parameters:
1. The number of stations: 9;
2. Counting range: 0-999999 times
3. The maximum dynamic length: horizontal 60.5 ± 0.5mm, vertical 24 ± 0.5mm 4. Mass of pressurized material: container: 200 ± 1g, weight of clothing material: 395 ± 2g, sample weight withbubble decoration: 594 ± 2 g, stainless steel disc: 260 ± 1 g.
5. Effective friction diameter of grinding block:
A type 200g (1.96N) friction head (9KPa)¢28.8-0.084mm
B type 155g (1.52N) friction head (12 KPa ¢ 90-0.1mm
6. The relative speed of the holder and the grinding table: 20-70r/min (adjustable)
7. The mass of the sample loading hammer: 2385±10g
< 5. Instrument configuration and consumables:
1.9 sets of sample holders
2.9 KPa,9 pieces of 12 KPa weights
3, 38mm, ≤ 140mm sampler, each set
4, 38mm, ≤ 140mm sampler backing plate, each piece
5. Pilling test set A set of
6, a set of SM50 standard sample photos
7, a set of EMPA standard pilling samples and a piece of SM-25 standard abrasive cloth 1.6m* 5m
8, standard foam 1.5m *0.5m set (4pcs/set)
9.One piece standard felt sheet
10, 20pcs 90mm felt disc
11, 50pcs 38 mm, ?140 mm sampling sheets 12. Other necessary accessories recommended by the manufacturer.

More about the Martindale Abrasion Tester: http://www.abrasiontesters.com/productlist/list-5-1.html