Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Fiber Lint Tester / Fiber Lint Abrasion Tester

Fiber Lint Tester / Fiber Lint Abrasion Tester

Author:QINSUN Released in:2023-04 Click:120

Fiber Fluff Tester/Fiber Fluff Abrasion Tester is a single station abrasion tester, which is used to test the abrasion and fuzz of samples. evaluation of the wear resistance of individual samples.

Product Introduction

Main Application :
Fiber Lint Tester / Fiber Lint Abrasion Tester is a single-station wear resistance tester, used to test the abrasion and lint of a sample, and is used to test the abrasion resistance of a single sample run.
Test standard:
Toyota standard TIS 01208-00F21
Test principle:
According to prescribed method and experimental parameters, using a nylon brush or a single abrasive to rub and pill the fabric. Then, under the specified lighting conditions, compare the sample after pillingevaluate the pilling level.
Instrument features:
1. High-definition LCD blue screen display control;
2. Equipped with acrylic transparent organic protective cover to ensure safety;
3. The cycle speed is 70 CPM (adjustable), with 20mm wide working amplitude.
Properties of fiber fluff:
1. High strength: the strength of short fiber is 2.6-5.7cN/dtex, and that of high strength fiber is 5.6-8.0cN/dtex. Due to the low hygroscopicity, the wet strength is basically the same as the dry strength. The impact resistance is 4 times higher than that of nylon and 20 times higher than that of viscose fiber.
2. Good elasticity: The elasticity is close to that of wool. When extended by 5% to 6%, it can recover almost completely. The wrinkle resistance exceeds other fibers, that is, the fabric does not wrinkle, and the dimensional stability is good ~141cN/dtex, 2~3 times higher than nylon.
4. Good wear resistance: Wear resistance is second only to nylon, which is better than other natural fibers and synthetic fibers.
5. Good lightfastness: lightfastness is second only to acrylic fiber.
6. Good corrosion resistance: resistant to bleaching agents, oxidizing agents, hydrocarbons, ketones, petroleum products and inorganic acids. Dilute alkali resistance, not afraid of mildew, but hot alkali can make it decompose.

Prev:

Next: