Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Fabric Flat Abraser Martindale Abrasion Tester – Standard Group

Fabric Flat Abraser Martindale Abrasion Tester – Standard Group

Author:QINSUN Released in:2023-04 Click:119

Standard Group (Hong Kong) Co., Ltd. is a comprehensive supplier of material testing instruments and has been supplying various material testing instruments and related technologies for a long time. The company\'s advantageous products include rubbing fastness tester, pilling tester, fabric bursting strength tester, flammability tester and so on.

[Martindale Abrasion Testing Machine-Standard Group] The following is an introduction to the Martindale Abrasion Testing Machine supplied by Standard Group (Hong Kong) Co., Ltd. Situation :

Martindale Abrasion Tester - Standard Group

Product details:

Martindale Abrasion Tester can test the abrasion resistance and pilling performance of various fabrics. Under a certain pressure, the sample and the abrasive are subjected to continuous inversionthe friction and the degree of wear and pilling is assessed by comparison with the standard parameters. Touch screen operation with complete programmer, pre-programmed batch and total counts, individually set counts for each test head; 4 speeds selectable including standard speeds.

Technical parameters:

1. Number of stations: 9 stations;

2. Counting range: 0~999999 times

3 Maximum stroke : horizontal 60.5 ± 0.5 mm, vertical 24 ± 0.5 mm

4. Mass of material under pressure:

a. Container: 200 ± 1 g

b. Garment sample weight: 395 ± 2g

c. Sample furniture decoration weight: 594 ± 2 g

d. Stainless steel butterfly: 260 ± 1 g

5. Effective friction diameter of grinding block:

Type A 200g (1.96N) friction head (9kPa)¢28.8 -0.084mm

Type B 155g (1.52N ) friction head (12kPa) ¢90 -0.10mm

6. Relative movement speed between holder and grinding table: 20-70r/min (adjustable)

7. Mass ofhammer sample load: 2385±10g

Accessories and consumables:

1. 9 sets of sample clamps;

2.9 kPa, 12 kPa each weighs 9 pieces;

3. One set of Φ38 mm and Φ140 mm samplers;

4. One set of Φ 38 mm and Φ 140 mm sampler backing platesOne piece;

5. One set pilling test kits;

6. A set of SM50 standard samples;

7. EMPA standard pilling samples Take one set and one piece of SM-25 standard abrasive cloth 1.6m× 5m;

8. A set of standard foam rubber 1.5m×0.5m (4 pcs/set);

9 1 piece of standard felt sheet;

10 .20 pcs Φ90mm felt disc;

11. 50pcs Φ38mm and Φ140mm sampler blades;

12 Other safety accessories recommended by the manufacturer.

Meets standards: ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2 , M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO 40, JIS L1096 8.17.5 Method E, Woolmark TM 112/196, BS EN 388/530/13770,ISO 20344


Martindale Abrasion Tester can test the abrasion resistance and pilling performance of various fabrics.

More information on [Martindale Abrasion Tester] equipment please!