Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline

Search


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai
Tel:021-67801892
Phone:13671843966
E-mail:info@standard-groups.com
Web:http://www.qinsun-lab.com

Your location: Home > Related Articles > Electric paint film cross hatcher/electric cross hatch tester/cross hatch tester

Electric paint film cross hatcher/electric cross hatch tester/cross hatch tester

Author:QINSUN Released in:2023-04 Click:108

Electric paint cross-cut tester/electric cross-cut tester/cross-hatch tester is used for various scratch resistance of paint and coating surface and scratch resistance tests to determine the adhesion properties of paints and coatings.

 

Main Application :
Electric paint film scratcher/electric cross-cut tester/cross-cut tester is used for various scratch resistance and scratch resistance tests on paint and coating surfaces to determine the adhesion properties of paints and coatings.

Test Principle:
The scratcher cuts out a precise pattern on the coating, cutting in a cross-shaped lattice pattern. Adhesion measurements were then taken by applying tape over the incision and pulling it apart.

Test standard:
1.VDA 621-411 Paint Adhesion
2.EN ISO 2409 Paint-Coating Mesh Grid cutting test
3.ASTM D 3359 Standard Test Guidelines for Coating Adhesion by Tape Method

Technical parameters:
1. Instrument power supply: 115/230 VAC, 50/60Hz (please specify voltage when ordering)
2. Equipment power: 400 W
3. Test piece specification: 80×50mm
4. Sample thickness: 0.5 ~ 20mm
5. Standard load range: 2 ~ 50N (2N load capacity)
6. Special load range: 1 ~ 10N (1N load capacity) (need to cooperate with optional accessories)
7. Cutting path: 25 or 45mm
8. Cutting speed: 1 m/min or 40 mm/s

Technical characteristics:
1. 2 marking speeds and 2 marking lengths can be combined as needed.
2.9 kinds of predetermined cross marks, which meet the standards used by most.
3.1 free program control cross mark moso to meet special needs.
4. Use the stepper motor to set the mark distance.
5. When scratching through the insulating layer to the metal base layer, there will be a display.
6. Fast clamping device, wide clamping range.

Prev:

Next: