Taber 710 scratch resistance tester (five finger scratch tester)

The Taber 710 Scratch Resistance Tester (Five-Finger Scratch Tester) is used to evaluate materials for shear, scratch, gouge, scratch and engraving performance. Developed for various kinds of wood-based panels and wood-based decorative panels for scratch resistance testing, can meet GB/T17657-1999 Test methods for physical and chemical properties of wood-based panels and wood-based decorative panels, and conduct scratch resistance test, is an ideal testing equipment for quality inspection departments at all levels and wood-based panel manufacturers, and can provide you with accurate test results

Product introduction

Product Introduction:
Taber 710 Scratch Resistance Tester (5-Finger Scratch Scratch Tester) is used to measure the shear, to evaluate scratching, gouging, scratching and engraving properties of materialsueren. The fields of application are: hard organic materials, plastics and glass, etc. The wood-based scratch tester is used to test the scratch resistance of the material surface. It is developed for the scratch resistance test of various wood-based boards and decorative wood-based boards. Physical and Chemical Properties Test Methods of Wood-based Panels, to carry out the test of scratch resistance determination, is an ideal testing equipment for quality inspection departments at all levels and wood-based panel manufacturers, and can provide you with accurate test results.

Scratch Tester Application:
Taber 710 Scratch Resistance Tester (five-finger scratch tester) For evaluating shear, scratches, gouge , scratch and engraving properties of materials. Application areas include: rigid organic materials, coating adhesives, powder coatings, anodized materials, soft metals, plasticsfen and glass, etc. It can also be used to test the bonding quality of the same material, protective coatings and the final performance of similar materials. The Taber 551 is simple to operate, easy to move and can test square or round materials from 1/2 to 4 thick.

Complies with standard:
GB/T17657-1999
ISO 4586-2
JIS K6902
Federal series of standards
Terrazzo 90322-9E-1
UNI 9428 pak rniture
AS/NZSAS2924.2
ASTM C217
CEN series of standards
DIN 53 799
DIN 68 861-4

Technical parameters: st Melting
1. Maximum test pressure: 5N
2. Specimen rotation speed: 5±1r/min
3. Test force accuracy: ±2%
4. Test piece maximum size: Φ90～Φ100mm
5. Total size: 120×120×480mm
6. Weight: 15kg

Operation:
Before loading the sample, the bar must be placed on thecorrect height depending on the thickness of the sample. The precision cutting tool is installed on the beam and placed on the sample. Start the instrument and the turntable rotates at a constant speed to ensure accurate measurement results. By varying the load on the cutting tool, you can assess the shear or scratch resistance of the material.
The beam design of the instrument allows it to be leveled with the sample and turntable and raised or lowered as needed. In addition, the weigh bar can also be lifted and suspended in the air to assist the operator in removing the sample. By changing the position of the sliding weight, the total load of the sample can be adjusted in the range of 0-1000 g. Cutting tools can choose to use carbide cutters or conical zhan stones.
The test results can be assessed visuallyimage using the 10x magnifying glass equipped with the machine, and the user can also use a high-precision optical microscope to observe.

Prev: Electric paint film cross hatcher/electric cross hatch tester/cross hatch tester