Direct shear pull friction tester for geotechnical materials

Direct shear pull friction tester for geotechnical materials

Applicable scope:

The geosynthetic material direct shear pull-out friction tester is used for direct shear friction tests between various geosynthetic materials and soil stone materials, as well as friction tests between geosynthetic materials in soil and surrounding soil for pull-out resistance.

Compliant with standards:

JTG E50-2006 T1129 Test Code for Geosynthetic Materials in Highway Engineering - Direct Shear Friction Characteristics Test

JTG E50-2006 T1130 Test Code for Geosynthetic Materials in Highway Engineering - Pullout Friction Characteristics Test

SL235-2010 Hydraulic Testing Code for Geomaterials

GB/T17635.1-98 Geotextiles and related products - Determination of friction characteristics

Note: Meet the above standards, but not limited to them;

Technical parameters:

1. Stress range: 10KN

2. Cutting box size: 300 x 300 x 50mm

Size of pull-out test box: 250 x 200 x 200mm

3. Displacement stroke: 50mm

4. Displacement accuracy: 0.01mm

5. Shear stress accuracy: 0.5%

6. Normal force range: 600KPa

7. Normal force accuracy: 10KPa

8. Stepless speed regulation: 0.1-5mm/min

9. Power supply voltage: 220V (50HZ ± 1%)

10. Boundary dimensions: 1600 * 600 * 900mm

Applicable scope:

The geosynthetic material direct shear pull-out friction tester is used for direct shear friction tests between various geosynthetic materials and soil stone materials, as well as friction tests between geosynthetic materials in soil and surrounding soil for pull-out resistance.

Compliant with standards:

JTG E50-2006 T1129 Test Code for Geosynthetic Materials in Highway Engineering - Direct Shear Friction Characteristics Test

JTG E50-2006 T1130 Test Code for Geosynthetic Materials in Highway Engineering - Pullout Friction Characteristics Test

SL235-2010 Hydraulic Testing Code for Geomaterials

GB/T17635.1-98 Geotextiles and related products - Determination of friction characteristics

Note: Meet the above standards, but not limited to them;

Technical parameters:

1. Stress range: 10KN

2. Cutting box size: 300 x 300 x 50mm

Size of pull-out test box: 250 x 200 x 200mm

3. Displacement stroke: 50mm

4. Displacement accuracy: 0.01mm

5. Shear stress accuracy: 0.5%

6. Normal force range: 600KPa

7. Normal force accuracy: 10KPa

8. Stepless speed regulation: 0.1-5mm/min

9. Power supply voltage: 220V (50HZ ± 1%)

10. Boundary dimensions: 1600 * 600 * 900mm

Prev: Vertical permeability tester for geotextiles