din Abrasion Tester_Rubber Abrasion Tester_Sole Abrasion Tester

Main application:
It is used to measure the abrasion resistance of rubber tires, rubber shoes, tires, etc. to identify the quality of rubber products. During the test, the rubber material rubs against the mesh on the roller under a certain load and the wear of the sample is measured within the specified stroke.

Product Introduction:
Under the specified contact pressure and the given area, the sample and the sandpaper are at a certain angle, and the test is measured The abrasive sandpaper produced by rubbing the sample at a certain level of sandpaper is wound on the surface of the roll, and the sample is pressed firmly on the roll with sandpaper to make the sample move laterally along the roll.

Standard:
DIN 53516, JIS K6369, GB/T 20991 No. 8.3, GB 20265-2006, GB20266-2006, SATRA T/M174, BS 903, JIS K6264, GB/T9867, ISO4649, etc.

Technical parameters:
Test piece: φ16mm, 6~15mm (D)
Clamp load: 2.5N
Weight load: 2.5N, 5N
Side displacement clamp: 4.2mm/roll per circle
Sanding cloth: 60#
Roller diameter: 150mm
Roll length: 460mm
Roller speed: 40rpm
Planned stroke: 40m/20m
Wear rate: 0.32m/sec
Pitch angle: 3° Angle between test piece support axis and the vertical surface of the roll
Volume: 70×30×30cm
Weight: 61kg
Power supply: 1∮, AC220V, 3A</p
1. Product quality commitment:
The products sold are all produced by original brand factories. (with product-related certificates)
The product will be inspected before delivery by relevant technical personnel to ensure that all functions of the product are complete and undamaged before shipment.
We are prepared to pay all responsibleorder in case of quality problems (non-human damage) during the warranty period of the instruments we supply.
2. Commitment to delivery date:
The buyer and the seller will try to deliver the goods within 7 days from the date of payment after negotiation of the goods transaction, and deliver the goods to the location according to the time required by the buyer.If the purchased product is a pre-notified product, you must negotiate with us and request the purchase file to meet your needs in a timely manner.
3. Establish cooperation concept, management system and long-term system:
1. Pre-sales service: set up Specialized institutions, our relevant staff will help you with product selection in time.
2. In-sale service: In order to avoid unnecessary losses due to improper use of your users, our company will arrange relevant technical personnel to assist during the use process.e guide to ensure the correct use of the product, so that users can use it safely and conveniently.

Prev: WYZENBEEK Abrasion Tester – Wyzenbeek Calibration Tool