Common Problems of Humidifying Device in Water Cooled Xenon Lamp Aging Test Chamber

The humidification function of the water-cooled xenon lamp aging test chamber mainly uses a humidifier, so in general, the humidity in the xenon lamp climatic test chamber is unstable, which may be the problem of the equipment humidifier. Our company qisnun Precision Electromechanical Technology Co., Ltd. is an equipment manufacturer, the R&D engineer will introduce the common humidifier problems and solutions below, hoping to be helpful to customers.

1. Humidifier sink is not enough.

Answer: Add water. Remove the steam pipe, lift the water tank off the base, turn the water tank upside down, open the water filling cover and add some water to the water tank. After the water injection is completed, tighten the water cap and check the water cap and valve.e spring. (Output) If there is a drip. Place tank on bottom cap as required by pairing - tank fits bottom.

2. The vapor circuit of the xenon lamp aging test chamber is incorrectly connected.

Treatment method: put the humidifier on the ground behind the right side of the artificial air conditioning box, then insert the steam outlet pipe into the gas production pipe and use a plastic tube special flexible hose to connect the steam outlet hose of the humidifier to the artificial air conditioning box. Keep the angle of the steam inlet pipe > 3° and prevent the plastic pipe from sagging or flattening, so as not to block the path of the steam due to water accumulation .

3. There is a circuit connection problem.

Treatment method: Insert the power plug into the socket on the right side and backe of the humidifier to use it. The power supply to the humidifier is controlled by a climatic box to ensure humidity.

Additionally, if there is a problem with the xenon lamp aging test chamber control system, or if there is a problem with the humidification pump , you should contact the manufacturer\'s technicianmedical personnel to resolve this situation. Reversing damage while repairing can also present some security issues. Therefore, reporting to the manufacturer for repair is a more effective solution.

As an enterprise integrating R&D, manufacturing, sales, training and service, Shanghai Fanbiao Textile Testing Technology Co., Ltd. is committed to providing more test instruments to the market, long-term supply of textile, leather, Combustion test instruments, automotive interior materials, weather aging environment.ronmental, masks and protective clothing, etc., can also accept non-standard customization. Before purchase, we can carry out targeted tests according to customer requirements to ensure that the instruments purchased are suitable.

Prev: Scratch Speed ​​and Scratch Angle of Scratch Resistance Tester