Automotive interior fog tester function test

The car indoor atomization tester is a test equipment independently developed and produced by our company qisnun Precision Electromechanical Technology Co., Ltd. It is suitable for interior materials such as automobiles and aircraft, such as automotive interior plastic parts, polyurethane, textiles, leather, adhesives Evaluation of the evaporation of volatile components of materials such as non-woven fabrics and high temperature thermoplastic elastomers.

Compliant with standards:

DIN75201, ISO6452, ISO17071, SAEJ1756, QB/T2728, BSEN14288, PV3920, PV3015, ES-X83231, NESM0161, D451727, GM9305P, TSM0503G.

Principle of the test:

The sample is heated in the nebulization cup and begins to volatilize, and the volatile gas condenses on the glass plate or foil. aluminum which has been cooled by the cooling chamber. After the condensation process is complete, removethe glass plate or aluminum foil, measure the atomization value or the weight of the condensed components on the glass plate or aluminum foil, and compare them with the data before condensation, so as to obtain the atomization volatility characteristics of the sample.

Test operation:

1. Preliminary sample preparation

2 Open high and low temperature baths and reach the set temperature

3. Clean the nebulizer cup and the nebulizer glass plate

4. Place the sample

p>

5. Place Glass plate or fogged aluminum foil

6. Place the cooling chamber

7. Maintain the two tanks at the set temperature and make operate normally until the time required for the test

8. Take the glass plate or aluminum sheet down and lay it down for the specified time

9. Measure thea shine, haze or weight of the aluminum foil of the glass plate

10. Compare the data and get the final result

As a company integrating the R&D, manufacturing, sales, training and service, Shanghai Fanbiao Textile Testing Technology Co., Ltd. is committed to continuously providing more test instruments to the market, and providing long-term non-standard customization is acceptable, and targeted testing can be carried out according to customer requirements before purchase to ensure that the instruments purchased are suitable.

Prev: Four main functions of xenon lamp aging tester