Experimental Principle:
Floor Abrasion Tester-Taber Abrasion Resistance TesterVia a Pair of Friction Wheels The rotating action creates an \"X\"-shaped friction action. Equipped with a full set of auxiliary weights, sample holders, friction wheels, vacuum devices, membrane control keypads and electronic counters.
Product details:
The Taber abrasion resistance tester mainly uses various kinds of friction wheels to rotate on the sample by rotary grinding Testing the abrasion resistance of leather and plastic materials. Select the default applicable weight set for testing material properties. Detects weight loss on the outer surface of the sample, such as obvious mechanical damage, TAPPI T476, ISO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, JIS K6964, DIN 52347, DIN 53109, DIN The detection includes metal, paint, plate surface, coating Abrasion resistance oflayer materials, textiles, leather, rubber, etc. Applications: Suitcases, carpets, cardboard, clothing, glass, plastic coatings, ceramic tiles, metal plates, paints, varnishes, decorative plates, high-voltage plates, plastics, textiles, resilient floor mats, traffic paint, anodising, blankets , electronic parts, decorative panels, waxes, labels, leather cases, dental materials, car interiors, resins, furniture, etc.
Specifications:
Test piece: outer diameter 108 mm, inner diameter 8 mm, 3 mm (D)
Grinding wheel: diameter 2”(M*45mm)1/2”(W)
Center distance between grinding wheel: 63.5 mm
Center distance between grinding wheel and test wheel: 37~38 mm
Rotational speed: 60/72 rpm
Weight: 250 g, 500 g , 1000g
Counter: LCD, 0~999,999
Volume: 530 ×320 ×310+ vacuum cleaner
Weight: 18kg (excluding vacuum cleaner)
Power supply: 1φ, 220v/50HZ
Wear index calculation formula: wear lossweight/formula number of revolutions × 100
Properties Taber 5135 abrasion test machine:
*Sanding process
Place the material to be tested on the turntable and two grinding wheels press with a certain weight on the material to make it wear.
When a sample with an area of 10 x 10 cm is subjected to abrasion, the surface material of the sample is abraded by full angle particles or silk fabrics to form a complete ring.
The grinding wheel rotates with the rotating surface of the sample disc, resulting in relative movement and wear, and the offset of the grinding wheel axis from the rotating axis of the turntable during the rotation process produces a sliding motion, causing the material is abrasive.
Simulate the actual conditions of use or meet the test conditions specified in the standard
- A variety of different wear can bemedia and accessories are selected for different tests
- Yes Repeat the test on the same point of a media, the thickest media about 0.5\" is damaged or worn
- Two speeds can be set (60, 72 rpm), 0-50000 rpm (Fast set 100, 500, 1000 or 2500 rpm) and 3 types of load.
Vacuum cleaner removes dirt
The suction arm of the vacuum pump passes through the hinge and the back of the instrument The adjustable device connection can precisely adjust the height to adapt to different sample thicknesses
Ensure the stability and accuracy of the test
Strict control ensures reliable results
Selected grinding wheel abrasives are selected through strict quality control, with high quality and good stability
Control panel Has the following functions:
Digital display test phasee and menu selection:
Rotation number selection key - used to set the number of rotations
Vacuum degree - Adjustable suction power of the vacuum pump
RUB RUNS - Shows the number completed revolutions (counting starts automatically after pressing the start button)
RUN VACUUM CLEANER - for cleaning the drive shaft and sample table
Internal memory system can record the number of revolutions in case of a sudden power failure
Prev: DIN Abrasion Tester-GB9867 Rubber Roller Abrasion Testing Machine