YG401F Martindale Abrasion Tester (9 Station) Brand New

【Application】

For knitwear, abrasion resistance tests and pilling of wool fabrics, imitation leather, synthetic leather, etc. under pressure.

【Standard Conformity】

GB/T4802.1-1997, ASTM D4970, ISO12945-2:2002, JIS 1096E, ISO12947 etc.

【Technical parameters and configuration】

★The number of stations: 9 or 8

★Count display:

a. Estimated number: 0～999999 times

b. Accumulated number: 0～999999 times

Stroke: 24±0.5mm, 60.5±0.5mm

★Print quality:

a. Holder: 200 ± 1g

b. Sample weight: Fabric sample weight: 395 ± 2g

Furniture decoration sample weight: 594 ± 2g

C. Stainless steel flap: 260 ± 1g

Grinding block effective friction diameter:

Type A 200g (1.96N) friction head ￠28.8－0.084mm

B type 155g (1.52N) friction head ￠90－0.10mm

★ Clip Relative speed of movement betweenHolder and grinding table: 50-2r/ min

★Weight of the loading hammer: 2385±10g

★Dimensions: 885×600×410mm (L×W×H)

★Weight: 150kg

★Power Supply: AC220V 50Hz

How to Purchase a Qualified Martindale Wear Tester Advanced Reading:

The Martindale Wear Tester is used to measure fabric pilling under light pressure. Under the specified load, the circular sample is rubbed with the abrasive material (ie, standard fabric) with the planar motion of the trajectory forming the Lissajous figure. The sample holder containing the sample or abrasive is free to rotate about its axis perpendicular to the horizontal plane. Whether the sample holder is filled with the sample or the abrasive depends on the test method used. Its trajectory forms a plane friction motion of a complete Lissajous figure, including 16-fold friction, ie the two outer driving wheels of the Martindale wear tester drrotates 16 times and the inner drive wheel rotates 15 times. The Lissajous figure prescribed in the standard is a figure formed by alternating movements. This movement is repeated diagonally from a circle to a narrowing ellipse until it becomes a straight line, from which it returns to the circle via a widening ellipse. However, the instruments made by many domestic small businesses without production qualifications and processing techniques do not have that at all Standard Lissajous trace, leading to uncertainties in test results. (See image below)

Default Lissaru graphics motion trajectory.

Remove the material from the grinding table, cover the surface of each grinding table with ordinary white paper with a diameter of (100±5) mm and a basis weight of at least 100 g/m2 and fix it on the grinding table Make sure the surface is perfectly flat.

LeadIn turn, insert the stainless steel sleeve of the same diameter as the sample pin shank into the shank sleeve of the sample guide plate, install an ordinary ballpoint pen, and bring the pen tip into contact with the surface of paper. Rotate the instrument so that the number of rubs is 16 times to form a complete Lissajous figure.

Draw two parallel lines that just meet the extreme curves on opposite sides of the Lissajous figure. Draw two more parallel lines for the other two sides, making sure the lines intersect perpendicularly. Measure with an accuracy of ±0.2 mm on each side using an appropriate method. Check the 31 lines drawn, it is important to check the symmetry of the Lissajous figure. If the curves match or the spacing is uneven (refer to Figure A.1), consult the equipment supplier, its appearance is designedbeautiful and generous, it adopts a touch-sensitive screen, the interface is easy to understand, and it is easy to operate. The microcomputer system uses two counting methods, which are intuitive and easy to set. Test at the same time to improve test efficiency. The instrument is also equipped with two types of Lissajous (Lissajous) 24mm × 24mm, 60.5mm × 60.5mm movement track and various supporting accessories, which can be adapted to different test methods and standards.

This instrument is suitable for testing the degree of pilling of fabrics, such as GB/T4802.2, ASTM D4970, ISO12945-2, etc. The principle: Under specified pressure, the circular sample is filled with the fabric of the same Material is rubbed according to the path of the Lissajous figure and the degree of pilling of the sample is evaluated after the specified number of revolutions has been reached. It is also applicable to abrasion resistance test of GB/T13775, ASTM D4966, ISO12947 and aother fabrics. Its principle: under a certain pressure, the circular fabric sample will rub against the standard abrasive according to the movement trajectory of the Lissajous curve, causing damage to the sample, and the wear resistance of the fabric is expressed by the number of samples is damaged performance.

【Related wear-resistant pilling products】

Box-type pilling process (2 boxes)----YG(B)511-II roller pilling- Box Shape Tester

Box Shape Pilling Tester (4 Boxes)----YG(B)511-IV Box Shape Rolling Pilling Tester

Martindale Method (8 digits or 9 digits)---YG(B)401E Martindale Abrasion Tester

Martindale Method (4 digits or 6 digits)---??Type YG401GMartindale Abrasion Tester ( 4 stations)

Circular Track Method--YG(B)502 Fabric Pilling Tester

Grinding Wheel Method Abrasion Test--YG(B)522 Abrasion Testing Machine ( TABER Abrasion)

【Keywords】

Martindale Instrument Flat Loopfgerät Fabric Flat Sander Digital Fabric Flat Sander Abraser Martindale Abrasion Tester Fabric Abrasion Tester

Prev: .YG(B)401E Martindale Abrasion Tester (6 Station Touch Screen)