Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Product Show > Wyzenbeek Abrasion Tester

Wyzenbeek Abrasion Tester

Author: Released in:2024-05-11 Click:12

Wyzenbeek Abrasion Tester

Wyzenbeek Abrasion Tester

Wyzenbeek Abrasion Tester Standard

ASTM D4157:Standard Test Method for Wear Resistance of Textiles (Swing Roller Method)


Oscillator Abrasion Tester is also named as Wyzenbeek Abrasion Tester, used to determine the abrasion resistance of fabrics when rubbed against a standard abradant or a wire mesh screen in a backward and forward motion over a curved surface. Particularly it’s suitable for abrasion resistance of fabrics used in the automotive and furniture industry. The instrument follows the U.S. standard with four friction heads and electronic counters to control the operating cycle.

Work Principle

The long strip sample fabric is mounted on the front and rear fixtures of the friction head with a certain tensioning force applied.The friction medium is installed on the circular grinding platform. Make the sample contact with the friction medium and apply a certain load on the sample.The friction platform moves forward and backward to abrade the sample.After a certain number of friction, assess the change of sample's fracture strength.


1. Modern efficacy design.

2. The suction device is connected to an auxiliary vacuum cleaner.

3. Sealed gear actuator ensures quiet operation.

Technical Parameters

Test number 4
Abrasion table Cambered surface -R100mm,Length-400mm
Test stroke 76±2 mm
Abrasion velocity 90±1 /min(double  friction)
Tension adjusting weights 340g (The force applied to the sample can be adjusted from 4.45 to 26.7 N)
Load weight 150g (adjusted from 4.45 to 15.575N)
Tension  of  sample 17.8N(adjustable)
Sample loading 13.4N(adjustable)
Sponge rubber pressure pad 50×50mm(±1mm)
Instrument material Stainless steel
Surface treatment Paint spraying
Sample size 245×73 mm
Dimension 50L× 50W × 60H cm
Weight 75kg
Power supply 220V,50Hz,0.05A

Accessories and Consumables:

Rubber pad (8 / bag)

Metal mesh - Wyzenbeek (4 / bags)

Standard abradiant #10 cotton canvas - 60 inch x 5 yards

Fine sandpaper for cleaning rubber pad

Nylon brush, soft fur