Welcome to the Qinsun Instruments Co., LTD! Set to the home page | Collect this site
The service hotline


Related Articles

Product Photo

Contact Us

Qinsun Instruments Co., LTD!
Address:NO.258 Banting Road., Jiuting Town, Songjiang District, Shanghai

Your location: Home > Related Articles > Wet rubber wheel abrasion wear tester / dynamic load abrasion wear tester

Wet rubber wheel abrasion wear tester / dynamic load abrasion wear tester

Author:QINSUN Released in:2023-04 Click:26

Abrasive Wear Tester for Wet Rubber Wheels/Dynamic Load Abrasive Wear Tester is mainly used for testing engineering plastics, powder metallurgy, alloys and other materials and abrasive wear performance under frictional conditions of ore, sand and sediment.


Meet the standard:
ASTM G65-04


Main application:
Wet rubber wheel abrasion wear tester/dynamic load The abrasion wear testing machine is mainly used to test the abrasive wear performance of materials such as engineering plastics, powder metallurgy, alloy bearings and ore, sand and sediment.

Key Features:
1. It consists of two parts: the main engine and the operating system;
2. The main engine part includes the base, shaft and drive systemem, and the weight Loading system, sample clamping part;
3. The control system includes measurement and control, display instrument part, and the two parts are connected by control cables;
4. The load, speed, time, friction partner material can be changed, surface roughness, hardness and other parameters under different conditions.
Technical parameters:
1. Indication Accuracy: ±1%
2. Spindle speed setting range: 10r/min-200r/min
3 Spindle speed accuracy: 1r/min
4. Temperature measurement range: room temperature - 200 ° C
5. Test revolution: 1-9999999 setting
6. Input voltage: AC 380V
7. Input power: 2.2kW
8. Adjustment range of sand supply system: 10-500 g/min.


Detection process:
1. The main shaft box is installed on the machine base, and the main shaft is supported by a set of bearings, which have high rotational accuracy. The back of the main shaftis connected to the motor;
2. There is a weight loading system on the right half of the base, which can apply a maximum radial load of 200N to the sample on the main shaft; front end of the main shaft, and the outer sample is pressed and fixed in the outer sample slot of the force bar;
4. Applying and removing the test force It is completed by the loading system, and the size is completed by the loading weights, loading the lever arm weight plate and the double arm weight plate;
5.The LCD screen displays the spindle speed and test time;
6. To adjust and set the speed, refer to the operating instructions of the frequency converter;
7. The control of the test time is completed by the instrument. The test time can be pre-set on the disc, and when the time is up, it will alarm and close for protection;
8. The instrument shows the temperature change of the sample during the test.


After-sales service:
1. We have after-sales service team. The company has been in the testing industry for more than ten years and has rich practical experience;
2. Be able to solve various problems in a timely and timely manner and relieve customers from concerns;
3. Spare parts are available to solve the problem of long delivery time for spare parts ordering ;
4. Outsource maintenance services;
5. We keep up with the update of industry standards, provide test tools that meet the updated standards in a timely manner, and provide personalized testing and consulting services ;
6. Long-term supply of various testing instruments.