Wear Testing Standards Related to Automotive Materials

Abrasion Testing Standards Related to Automotive Materials

Many automotive manufacturers have incorporated the Taber rotational abrasion test into their material testing specifications and requirements, including carpet/floor materials, coverings, cabin carpets, consoles, interior parts, seat covers, etc. The following is a partial list of standards that can be tested using the Taber Rotary Abrasion Testing Machine.

Reference Standard Title Scope ANSI/SAE Z26.1 - 1996 Testing of safety glass for automobiles and motor vehicle equipment The purpose of the test is to determine whether a plastic has a certain minimum resistance to abrasion. The purpose of the ANSI/SAE Z26.1 - 1996 safety glass test for automotive and automotive equipment is to determine whether the safety glass has a certain minimum resistance to abrasion.

ASTM D7255 Standard Test Method for RAbrasion Resistance of Leather (Rotating Platform, Double Head Method) The test method covers the determination of the abrasion resistance of leather using a Rotary Double Head Abrasion Tester (RPDH) .

ASTM G195 Standard Guide for Testing Using a Rotary Double Head Abrader (RPDH) The purpose of this guide is to help establish a method for performing abrasion testing on rigid or flexible materials at using a double-head rotary abrader (RPDH). DaimlerChrysler LP-463KB-21-01 Wear resistance of packing materials - TABER method This is a method for determining the wear resistance of packing materials using a measuring device. abrasion measurement of double grinding wheel type turntable.

Daimler-Chrysler MS-PP11-1 Vacuum Coated Plastic Parts - Surface Decoration This standard introduces the necessary requirements for vacuum coating the interior parts of plastic plastic parts.EU ABS, acrylic, nylon, polycarbonate or butyric plastic or other materials. coating system. Daimler-Chrysler MS-PP11-2 Vacuum Coating - High Wear Resistance of Plastic Parts - Surface Decoration This standard presents the coating system required for surface vacuum coating of interior plastic parts that require a high resistance to wear. These parts may be made of ABS plastic or butyrate plastic or other specified materials. Daimler-Chrysler Automotive Mat MS-JP4-13 Ford Engineering Materials Specification ESB-M99P14-A1 Pad printing, plastic head surface or painted plastic, interior parts. The transfer referred to in this description is the ink system transferred to the pad via the pad printing process. Surface of plastic interior parts.

They were originally advertised for use as transfer inks for graphics on interior partsin plastic. Ford Engineering Materials Specification WSS-M15P34-B1 Performance, Interior Trim Decal, High Wear Resistance This specification was originally developed for decals intended for use on dashboards and trim panels interior door trim. Continuous contact parts must have high wear resistance, such as door panels, game consoles, radios or other control settings. FordEngineering Material Specification WSS-M15P34-B2 Performance, Interior Trim Decal, Low Wear This specification was originally developed for decals used on dashboards and interior door trim panels. Wear resistance requirements are low for locations that are not continually contacted by users, such as the rear of the steering column or vertical surfaces of the dashboardd which are not close to the buttons. Ford Engineered Materials Specification WSS-M15P4-E Performance Specification for Interior Assemblies This specification defines the minimum durability and performance requirements required for decorative and/or functional interior panels and trim panels comprised of various combinations of materials.

Ford Laboratory Test Method BN 108-02 Abrasion Resistance - Taber Abrasion Tester This procedure is used to test the abrasion resistance of textile fabrics, coated fabrics, genuine leather, cardboard, carpets rubber flooring, carpets, coating materials, plastics and other floor painting substrates. sex. Ford Laboratory Test Method BN 108-04 Scratch Resistance This procedure is used to determine the scratch resistance of materials such as painted substrates, painted plastics, leather and luggage compartment mats.es. General Motors Automotive Interior Fabrics GM2751 This specification describes interior fabrics for seat covers, door trims and other applications. The fabric is made of fibrous textile materials and is knitted, woven or otherwise. The specification also covers plastic fabric construction.

Abrasion Resistance of General Motors GM9515P Organic Coatings (Taber Abrasion Test) This test method is modified from ASTM D4060 and describes the steps to determine the abrasion resistance of organic coatings to using the TABER abrasion test. General Motors GM9911P Abrasion Resistance of Plastic Coatings This method is used to determine the resistance of coatings to peeling from the substrate. General Motors GMW3208 Rotational Abrasion Test, Taber Type This standard uses a rotational abrasion tester to determine the wear resistance.position of materials.

[Dmark: This standard is intended to equate or replace the methods used to test fabric materials. ] General Motors HN0245 Determination of abrasion resistance Hyundai/Kia MS 300-2 Abrasion resistance of automobile interior trim and knitted fabrics ISO 3537 Road vehicles - Safety glazing materials - Mechanical testing This standard specifies safety related to all automotive safety glazing Mechanical testing methods are necessary for these glasses covering all types, regardless of their material or composition. SAE J 1530 test method for the determination of optical fiber loss resistance, abrasion resistance and whipping effect of automotive carpet materials. This test method covers testing for determining optical fiber loss resistance, abrasion resistance and whiskering of automotive carpet materials. A resistance testbrasion SAE J 1847 - Automotive Exterior Patterns This practice recommended by the Society of Automotive Engineers applies to stripes, a graphical test for wear resistance. It may also feature some vehicle-related labels and wood-grain plastic film. The results are judged by their readability, the pattern and color of the graphic logo.

ABS SAE J 2394 Seven-Conductor Power Supply Cable This SAE standard establishes the minimum composition and performance requirements for 7-conductor 1/8-2/10-4/12 cables used on trucks and trailers. SAE J 365 Scratch Resistance Test Method for Trim Parts This test can be used to determine the scratch resistance of items such as fiberboard, fabrics, plastic coated fabrics, leather, etc. SAE J 948 Abrasion Resistance Testing of Automotive Body Fabrics, Vinyls and Leathers and Tangle Test Method The MethodTaber test is used to determine the abrasion and tangle resistance of automotive fabrics and/or vinyl coated fabrics. Wear Resistance of SAE J80 Automotive Rubber Mats This approach covers the requirements for rubber floor mats and is composed of 5 rubber compounds to meet application needs. united nation - ECE Regulation 43 uniformly stipulates the certification of safety glass and glass materials. This regulation applies to safety glass and glass materials that can be used to make windshields or windows of motor vehicles.

Prev: Wear resistance methods of automobile guide groove sealing strips أداة الاختبار –