Universal friction and wear testing machine/universal wear tester

The Universal Friction and Wear Tester/Universal Abrasion Tester is equipped with various accessories to meet different standard requirements, with many functions and a wide range

Product introduction

Scope:

Universal Friction and Abrasion Tester/Universal Abrasion Tester can be used for surface grinding, curved grinding, edge grinding, edge grinding and abrasion resistance tests such as anti-blooming, edge closure and burls. are used on woven fabrics, knitted fabrics, coated fabrics, pile fabrics, socks, felt, non-woven fabrics, deep fabrics, yarn, cord plastic film, rubber, leather, paper and many other materials. The sample to be tested can be dry or immersed in water, oil or other liquids.

Technical parameters:

1. Clamp inner diameter: 94 mm;

2. Retaining Ring Height: ≤9.5mm;

3. Speed: 120±15 /min;

4. Stroke: 25mm;

5. Air pressure: 62kPa(9psi);

6. Dimensions: 330×500×460 mm (length×width×height);

7. Weight: 33kg (72lb);

8. Power supply: 120/230V, 50/60Hz, 2A/1A.

Main features:

1. Universal Friction and Wear Tester/Universal Wear Tester is equipped with various accessories to meet different standard requirements, with many functions and a wide range;

2. Equipped with flat grinding test head and curved grinding test head;

3. Equipped with a digital timer;

4. Equipped with LCD timer;

5. Equipped with an electronic touch rubber diaphragm and a non-electronic touch rubber diaphragm;

6. Equipped with a reciprocating workbench and an improved sample box stretcher;

7. Equipped with a set of pressure weights and a set of tension weights;

8. Equipped with a built-in silent air compressor system;

9. Equipped with sandpaper with holes and non-holes sandpaper;

10. Equipped with 50 meters of standard ribbon;

11. Equipped with standard cloth;

12. Equipped with calibration and test knife.

instrument features:

1. The test is performed in automatic mode, which not only ensures repeatable and accurate test results, but also saves time for the operator when evaluating the test results;

2. The advanced clamping device ensures a constant sample voltage;

3. Equipped with flat grinding test head (inflatable film type abrasion test method) and curved grinding test head, as well as the required weights and initial abrasive;

4. Built-in timer and mechanical cycle counter;

5. This machine has a reciprocating table and the flat grinding/bending test head is installed on it;6. Accessories for blooming, pilling and edge rub testing are available.

Complies with:

A, S, T, M, D3514/D3885/D3886, AATCC 119/120, FORD EFB 15J2/BN 112-01.

Accessories and consumables:

Blooming accessories

Sample holder with selvage and crease friction

Elastic friction lining

Abrasive 50 yards/roll

3 rating chart for ASTM D3514

Service Commitment:

Three product quality guarantees, one year warranty and lifetime service.

Prev: Taber abrasion testing machine / Taber abrasion tester